JVC HR-J470EK, HR-J670EK, HR-J672EK, HR-J270EK setup guide Recording

Page 14

14

BASICOPERATIONS(cont.)

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

3 5

SP/LP

PLAY

1

			2	–	RECORD		STOP/EJECT	PAUSE
			2	4	RECORD		STOP/EJECT	5
				PR+/
						6
					– –:– –
TV/VCR
2		1	2		3
2					2
NUMBER		4	5		6
NUMBER
		7	8		9
					4
			0
						PR+/–		2
	1		?		SP/LP 3
					SP/LP 3
4,5 PLAY						PAUSE 5
4 RECORD						PAUSE 5
4 RECORD				3
				3
6	STOP
6

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

LOAD A CASSETTE

1 Insert a cassette with the record safety tab intact (See below).

●The counter is reset to 0:00:00 and the recorder power comes on automatically.

	CHOOSE A PROGRAMME
	Press PR +/– or the NUMBER keys to select the preset
2 you wish to record.
	SET TAPE SPEED
	Press SP/LP ( ). Check the SP/LP indicator on the
	recorder display panel to confirm the selected tape
3 speed.
	● Picture quality of LP recordings will not be as high as
	on SP recordings.

4	START RECORDING
	Press and hold RECORD and press PLAY on the remote
	control, or press RECORD on the recorder.

	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP recording after inserting the
	cassette (☞ pg. 22).


	If "DIRECT REC" is set to "ON", the programme
	that appears on the TV screen will be recorded
	(☞ pg. 9).


	● You can not change the preset whilst recording is in
	progress. To change the preset, see step 5.

	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.

	● During the Record Pause mode, you can change the
	preset by pressing the PR +/– buttons or the NUMBER
	keys.

	STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
	the recorder. Then press STOP/EJECT to remove the
6 cassette.

INFORMATION

When using the AV connection (☞ pg. 5), you can switch between TV mode and AV mode by pressing TV/VCR.

*Depending on the type of TV used, TV/VCR button does not function as described above.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 14

Contents HR-J670EK HR-J672EK HR-J470EK HR-J270EK Safety Precautions Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide TV Aerial Cable not provided To connect to a TV with 21-pin AV input connector ScartBack of TV Back of RecorderRefer to Before performing the following procedure, make sure thatAuto for Auto Set Up function Tion pg and the TV is turned on,Progress, this process will be interrupted Or remote control until the display panelShows either the display as illustrated on You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTurn on the Recorder TV Auto Power OnLink Functions NexTView LinkSatellite Receiver Control Setting Check Result of Test Access SAT Control SET ScreenEnter Satellite RECEIVER’S Brand Find Programme Start Point PlaybackLoad a Cassette Start PlaybackActivate HIGH-SPEED Search PlaybackSearch Recording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberTimer Warning PDC RecordingEnter Programme Start Time Express Timer ProgrammingBefore performing Express Timer Programming TimeReturn to Normal SET PDC ModeTimer Mode Engage RECORDER’SReturn to Timer Mode Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Normal SCREEN/ DisplayTo cancel a programme When programmes overlap each otherCancel or Change Programme Setting Confirm Overlapping ProgrammesPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemPlayback Start PlaybackRecording Or press Record on the recorderSections Looking For Scene You WantSkip Over Unwanted Activate Index SearchSoundtrack Selection Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes During PlaybackSatellite Receiver Unit Aerial Pin AV input Connector ScartAutomatic Satellite Programme Recording TV Aerial cableSelect L-2 Select Mode Access Main Menu ScreenAccess Mode SET Screen Engage Auto Satellite Prog REC ModeOverride Automatic Tracking Playback Picture AdjustmentAdjust Tracking ManuallySelect Picture Control SET Mode Access Main Menu ScreenAccess Mode SET Screen Minimizing Picture Degradation While EditingEdit From Camcorder SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerOff. pg Select SettingTo the AV2 L-2 IN/DECODER connector On-Screen Display ENABLE/DISABLE ON-SCREEN DisplayOther Functions Power Save Mode Power SAVE, then pressNext Function Memory Auto TimerAuto SP→LP Timer Activate Repeat Playback Repeat PlaybackNtsc Playback Connection To a Stereo Audio Cable not provided SpeakerClock Set Just ClockGuide Program Number Set Video Plus+ SetupNumber Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelWith RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET CH SETAfter Scan Completed Screen preset positionsProcedures Is displayed on the screenInput Channel Storing Channels ManuallySelect Band Enter NEW Channel InformationFine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a ChannelChannel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List TV Station Channel Number Guide What happens if the tape runs out during recording? Questions And AnswersÄ remain lit on the display panel. Is there Problem? Troubleshooting Timer Recording Won’t stopIndex Front ViewTape Remaining Time Indicator displays time remaining AV1 L-1 IN/OUT Connector enables AV connecProgramme Time Indicators show the programme Record PauseRemote Control Fast Forward FF Button fast-forwards tape VCR, TV PR +/-,TV +/-, TV MutingRotary two-head herical scan Maximum recording timeDA4 Double Azimuth helical VHF 44.5 143/143 470 MHz