JVC HR-J670EK, HR-J672EK, HR-J470EK, HR-J270EK Ntsc Playback, Activate Repeat Playback

36ADVANCEDOPERATIONS(cont.)

Repeat Playback

– –:– –

1 2 3

2

4 5 6

7 8 9

4

0

1 LAY ?

Your video recorder can automatically play back the whole tape 100 times repeatedly.

1	START PLAYBACK
	Press PLAY.
2	ACTIVATE REPEAT PLAYBACK
	Press PLAY and hold for over 5 seconds, then release.
	● The Play indicator ( ) on the display panel blinks
	slowly.
	● The tape plays 100 times automatically, and then
	stops.

REW

STOP

FF

PAUSE

STOP PLAYBACK

3 Press STOP at any time to stop playback.

3

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.

NTSC Playback

Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes.

1

2

LOAD A CASSETTE

Insert a cassette recorded in NTSC.

START PLAYBACK

Press PLAY.

●"NTSC→PAL" appears on the screen for about 5 seconds.

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.