JVC HR-J470EK, HR-J670EK, HR-J672EK, HR-J270EK setup guide Edit From Camcorder

Page 30

30ADVANCEDOPERATIONS(cont.)

Edit From

A Camcorder

– –:– –

1 2 3

2

4 5 6

7 8 9

4

AUX0

PR

1 ?

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.

Recorder (HR-J670/672EK)

You can use a camcorder as the source player and your video recorder as the recorder.

MAKE CONNECTIONS

1 With HR-J670/672EK, connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s front panel AUDIO/VIDEO input connectors.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.

With HR-J470/270EK, connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder’s rear panel AV2 (L-2) IN/DECODER or AV1 (L-1) IN/OUT connector via an optional cable adapter.

	SET RECORDER’S INPUT
2	MODE
	With HR-J670/672EK, press AUX and/or PR so that
	"F-1" appears in place of a preset position number.
	With HR-J470/270EK, press AUX and/or PR to select
	"L-1" for the AV1 (L-1) IN/OUT connector, or "L-2" for
	the AV2 (L-2) IN/DECODER connector, depending on
	the connector being used.

3	SET EDIT MODE
	See "Picture Control" on page 29.
4	START CAMCORDER
	Engage its Play mode.
5	START RECORDER
	Engage its Record mode.

Recorder (HR-J470/270EK)

VIDEO	AUDIO input
input

	VIDEO OUT	Audio/Video Cable
	VIDEO OUT	(not provided)
		(not provided)

Cable adapter (not provided)

VIDEO OUT Audio/Video Cable (not provided)

Camcorder

Camcorder

AUDIO OUT

AUDIO OUT

Player

Player

Image 30

Contents HR-J670EK HR-J672EK HR-J470EK HR-J270EK Safety Precautions Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide TV Aerial Cable not provided To connect to a TV with 21-pin AV input connector ScartBack of TV Back of RecorderRefer to Before performing the following procedure, make sure thatAuto for Auto Set Up function Tion pg and the TV is turned on,Progress, this process will be interrupted Or remote control until the display panelShows either the display as illustrated on You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTurn on the Recorder TV Auto Power OnLink Functions NexTView LinkSatellite Receiver Control Setting Access SAT Control SET Screen Enter Satellite RECEIVER’S BrandCheck Result of Test Find Programme Start Point PlaybackLoad a Cassette Start PlaybackPlayback SearchActivate HIGH-SPEED Search Recording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberTimer Warning PDC RecordingEnter Programme Start Time Express Timer ProgrammingBefore performing Express Timer Programming TimeReturn to Normal SET PDC ModeTimer Mode Engage RECORDER’SReturn to Timer Mode Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Normal SCREEN/ DisplayTo cancel a programme When programmes overlap each otherCancel or Change Programme Setting Confirm Overlapping ProgrammesPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemPlayback Start PlaybackRecording Or press Record on the recorderSections Looking For Scene You WantSkip Over Unwanted Activate Index SearchSoundtrack Selection Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes During PlaybackSatellite Receiver Unit Aerial Pin AV input Connector ScartAutomatic Satellite Programme Recording TV Aerial cableSelect L-2 Select Mode Access Main Menu ScreenAccess Mode SET Screen Engage Auto Satellite Prog REC ModeOverride Automatic Tracking Playback Picture AdjustmentAdjust Tracking ManuallySelect Picture Control SET Mode Access Main Menu ScreenAccess Mode SET Screen Minimizing Picture Degradation While EditingEdit From Camcorder SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerSelect Setting To the AV2 L-2 IN/DECODER connectorOff. pg ENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display Power Save Mode Power SAVE, then pressAuto Timer Auto SP→LP TimerNext Function Memory Repeat Playback Ntsc PlaybackActivate Repeat Playback Connection To a Stereo Audio Cable not provided SpeakerClock Set Just ClockVideo Plus+ Setup NumberGuide Program Number Set Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelWith RF Connection Auto Channel Set Tuner SetPerform Auto Channel SET CH SETAfter Scan Completed Screen preset positionsProcedures Is displayed on the screenInput Channel Storing Channels ManuallySelect Band Enter NEW Channel InformationFine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a ChannelChannel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List TV Station Channel Number Guide Questions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Timer Recording Won’t stopIndex Front ViewTape Remaining Time Indicator displays time remaining AV1 L-1 IN/OUT Connector enables AV connecProgramme Time Indicators show the programme Record PauseRemote Control Fast Forward FF Button fast-forwards tape VCR, TV PR +/-,TV +/-, TV MutingRotary two-head herical scan Maximum recording timeDA4 Double Azimuth helical VHF 44.5 143/143 470 MHz