JVC HR-J672EK Selecting Sound You Want, Receiving Nicam Stereo And Bilingual Programmes

Page 25

25

Selecting The

Sound You

Want

(HR-J670/672EK only)

– –:– – AUDIO

1 2 3

2

4 5 6

7 8 9

4

0

1 ?

Receiving NICAM Stereo And Bilingual Programmes

Your recorder is equipped with a Digital stereo sound decoder (NICAM), making reception of stereo and bilingual broadcasts possible.

When the recorder is tuned to a different station, the type of broadcast being received will be displayed on the TV screen for a few seconds.

Type of Broadcast

On-screen Display

Being Received

 

 

 

Regular Monaural

(none)

NICAM Stereo

ST NICAM

NICAM Bilingual

BIL. NICAM

NICAM Monaural

NICAM

 

 

●To listen to a stereo programme, press AUDIO until

"HI FI L R" appears on the screen.

●To listen to a bilingual programme, press AUDIO until "HI FI L " or "HI FI R" appears on the screen (as required).

●To listen to the Standard (regular monaural) audio while receiving a NICAM broadcast, press AUDIO until "NORM" appears on the front display panel or on the screen.

NOTES:

●The NICAM audio programme will be recorded on the Hi-Fi audio track, and the Standard audio programme on the normal audio track.

●If the quality of stereo sound being received is poor, the broadcast will be received in monaural with better quality.

●Before playing back a programme recorded in stereo, or a bilingual programme, refer to "Soundtrack Selection" (See below).

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 33).

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO on the remote control changes the soundtrack being played back as follows:

TRACK

USE

On-Screen Display

 

 

 

 

 

 

 

 

HI FI

For Hi-Fi stereo tapes

L

 

 

 

R

 

 

 

 

L

HI FI

For main audio of Bilingual tapes

 

 

 

 

 

 

 

 

 

 

 

 

 

HI FI

For sub audio of Bilingual tapes

 

 

 

 

R

 

 

 

 

 

NORM

For audio-dubbed tapes

 

 

 

 

HI FI

For audio-dubbed tapes

NORM

 

NOTES:

●"HIFI L R" should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

●For instructions on recording NICAM stereo and bilingual programmes, see above.

●Bilingual programmes are not currently broadcast in the U.K.

●"O.S.D." must be set to "ON" or the on-screen displays will not appear (☞ pg. 33).

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HR-J670EK HR-J672EK HR-J470EK HR-J270EK Do not place the recorder Safety PrecautionsSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide Back of TV To connect to a TV with 21-pin AV input connector ScartTV Aerial Cable not provided Back of RecorderAuto for Auto Set Up function Before performing the following procedure, make sure thatRefer to Tion pg and the TV is turned on,Shows either the display as illustrated on Or remote control until the display panelProgress, this process will be interrupted You will need to start again. See Notes belowIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notLink Functions TV Auto Power OnTurn on the Recorder NexTView LinkSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Access SAT Control SET ScreenCheck Result of Test Load a Cassette PlaybackFind Programme Start Point Start PlaybackSearch PlaybackActivate HIGH-SPEED Search Recording Reset Counter Select Preset to WatchEngage ITR Mode SET Counter DisplayAccess Video PLUS+ Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Program Screen Enter Pluscode NumberPDC Recording Timer WarningBefore performing Express Timer Programming Express Timer ProgrammingEnter Programme Start Time TimeTimer Mode SET PDC ModeReturn to Normal Engage RECORDER’SCancel or Replace a Programme Check, Cancel And Replace ProgrammesReturn to Timer Mode Return to Normal SCREEN/ DisplayCancel or Change Programme Setting When programmes overlap each otherTo cancel a programme Confirm Overlapping ProgrammesS.T. Picture System Playback/ Recording According To Tape Charac- teristicsRecording Start PlaybackPlayback Or press Record on the recorderSkip Over Unwanted Looking For Scene You WantSections Activate Index SearchReceiving Nicam Stereo And Bilingual Programmes Selecting Sound You WantSoundtrack Selection During PlaybackAutomatic Satellite Programme Recording Aerial Pin AV input Connector ScartSatellite Receiver Unit TV Aerial cableAccess Mode SET Screen Access Main Menu ScreenSelect L-2 Select Mode Engage Auto Satellite Prog REC ModeAdjust Tracking Playback Picture AdjustmentOverride Automatic Tracking ManuallyAccess Mode SET Screen Access Main Menu ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder Edit To Or From Another Video Recorder Input ModeSET Recording DECK’S Start Source PlayerTo the AV2 L-2 IN/DECODER connector Select SettingOff. pg Other Functions ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Display Power SAVE, then press Power Save ModeAuto SP→LP Timer Auto TimerNext Function Memory Ntsc Playback Repeat PlaybackActivate Repeat Playback Audio Cable not provided Speaker Connection To a StereoJust Clock Clock SetNumber Video Plus+ SetupGuide Program Number Set Exit Video Channel SET Mode Access Video Channel SET ModeVideo Channel Set SET Video ChannelWith RF Connection Perform Auto Channel SET Tuner SetAuto Channel Set CH SETProcedures Screen preset positionsAfter Scan Completed Is displayed on the screenSelect Band Storing Channels ManuallyInput Channel Enter NEW Channel InformationChange Station Preset Position When Receiving a Scrambled BroadcastFine-Tuning Channels Already Stored Delete a ChannelSwitch Stations Access ManualChannel SET Screen Select NEW StationTV Station And ID List TV Station Channel Number Guide Ä remain lit on the display panel. Is there Problem? Questions And AnswersWhat happens if the tape runs out during recording? Troubleshooting Won’t stop Timer RecordingFront View IndexProgramme Time Indicators show the programme AV1 L-1 IN/OUT Connector enables AV connecTape Remaining Time Indicator displays time remaining Record PauseRemote Control VCR, TV PR +/-,TV +/-, TV Muting Fast Forward FF Button fast-forwards tapeDA4 Double Azimuth helical Maximum recording timeRotary two-head herical scan VHF 44.5 143/143 470 MHz
Top Page Image Contents