JVC HR-S7955EK Programme Navigation, If the VCR cannot detect the tape information, ‘NO Tape

Page 39

advanced features

39

Programme Navigation

When you record a TV programme with this VCR, the VCR automatically stores in its memory the recording date, start time and station name. You can store these information for up to

8programmes on one cassette. At maximum, information for 10 tapes can be stored. You can also enter the programme title when performing ‘VIDEO Plus+ Timer Programming’ ( pg. 23) or ‘Express Timer Programming’ ( pg. 26). It is possible to store these infor- mation only when ‘PROG. NAVIGATION’ is set to ‘ON’ (default setting) ( pg. 41).

When inserting a cassette with the record safety tab intact ...

CHECKING TAPE DATA

REMAIN [ 3]

The VCR checks the tape information for the Programme Navigation. If the VCR can store the information for 3 or less tapes, ‘REMAIN [ _]’ also appears on the TV screen.

If the VCR has already stored the information for 10 tapes, ‘MEMORY FULL’ appears. If you perform new recording, the oldest tape informa- tion will be deleted from the VCR’s memory.

CHECKING TAPE DATA

MEMORY FULL

If the VCR cannot detect the tape information, ‘NO TAPE

DATA DETECTED’ appears.

NO TAPE DATA DETECTED

NOTE:

If you press any button while ‘CHECKING TAPE DATA’ appears on the TV screen, the operation is canceled.

When inserting a cassette whose record safety tab has been removed ...

Playback begins automatically. You can use Navigation Playback ( pg. 40), but you cannot edit programme title or delete tape data ( pg. 41, 42).

NOTES:

•Programme Navigation is possible with the cassettes recorded with this VCR only.

•Before recording, make sure the VCR’s clock is set correctly.

•To record the programme information in this VCR’s memory, you must continue to record each programme for over the minimum recording time; 8 minutes for the SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode.

•Programme Navigation may not work properly depending on the tape being used.

•The programme information is stored in this VCR’s memory. If the memory in this VCR should ever be damaged and the programme information lost, it is impossible to restore that information.

Image 39

Contents HR-S7955EK Blue to N Neutral or Black Brown to L Live or Red Safety PrecautionsMoisture Condensation On The Safe Use Of Equipment Some Do’s And Don’tsContents Display Remote control Front Panel Diagram KeyGetting Everything Ready Welcome to JVCPerform Auto Setup pg Video Connection Consult your local JVC dealer Auto SetupThree-Step Quick Start Is vacant and have set the VCR toPreset Download PressOr E Perform Clock Set on Go to Step Check the ResultsFinish Off Go straight to 2000 used as example onlyWelcome to jvc Basic Features Stop & Eject PlaybackLoad a Video Cassette PlayRewind and Fast Forward Video Heads CleaningSingle Frame Movement Playback FeaturesAdvanced JOG Dial Pause During PlaybackNormal Variable Speed SearchHigh Speed Search You can use variable speed search with one of two methodsStart Recording RecordingChoose a Programme Set the Tape SpeedCheck Elapsed Recording Time and Reset It Display Tape Remaining TimeChange Display Information Recording Resume Function Instant Timer RecordingVideo Plus + Timer Programming Get to the Video Plus + ScreenEnter the PlusCode Number Leave the satellite receiver’s power on Programme stop time, then the date and presetMake sure that the preset number displayed is Delayed, your VCR will still record it properlyEngage Timer Mode Edit Programme TitleReturn to Normal Screen Press pthen press Start + Display panel looks like this Express Timer ProgrammingGet to the Programme Screen Enter Programme DetailsPress the number key 24H Express Timer Programming Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeEdit programme title Press the number key Then press When Programmes Overlap Each OtherAdvanced Features Digital TBC/NR Picture QualityManual Tracking Digital 3RPicture Control Video StabilizerSuper VHS ET S-VHS ET Tape TypeSuper VHS S-VHS, S-VHS ET and VHS Your VCR can record in S-VHS, S-VHS ET or VHSSee ‘Super VHS ET S-VHS ET’ on Recording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayTurning B.E.S.T. on or OFF Sound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Instant ReView Finding Specific ScenesSkip Search Index SearchIf the VCR cannot detect the tape information, ‘NO Tape Programme NavigationTurn Off Navigation Navigation PlaybackCharacter’ below Entering CharacterPress the number key 1. The Title Edit screen appears Enter programme title Press the number keys and EtoDelete Tape Data NexTView Link TV Auto Power OnYou can use your TV’s Remote Control to turn off the VCR Link FunctionsRecording on SET using the Aand Bbuttons and pressHighlight bar to Mode Direct RecInstalling Satellite Controller Satellite Receiver Control SettingsAppropriate number keys to enter the brand Setting satellite receiver’s brandSET using the Aand Bbuttons. Press Or E After pressing ModeOr E to finish the Sat Control Set mode Check Result of TestPress the Aand Bbuttons to move Auto Record from Satellite Receiver Auto SatelliteAdvanced features Buttons. Press OK / or E to select OUTPUT/INPUT SettingDesired mode EditingFor L-2 Select SELECT/INPUT SettingSet edit mode See Picture Control on Editing Using Another VCRYour VCR as the Player Editing from a Camcorder On-Screen Display O.S.D Other FunctionsAuto SP aLP Timer Power Save ModeNext Function Memory Auto TimerAuto Power Off/3H Repeat PlaybackAUX in or Tape Monitor Connection to a Stereo SystemSet Video Channel Access Video Channel ModeExit Video Channel Set Mode Video Channel SetMark on the screen moves Auto Channel SetupPress Or E Manual Channel SetupDelete a Channel Change Station NameButton on the Remote Control until the item you want to Change Station Preset PositionTV Station ID Guide Fine-Tuning Stored ChannelsBBC1 BBC2 ITV CH4 CH5 TV Station Channel Number GuideSetting the Clock Or E. The dateOr E. Set the correct year Guide Program Numbers Manually Setting Guide Program NumbersCan the VCR indefinitely remain in the Record-Pause mode? Uand cremain lit on the display panel. Is there a problem?Question and Answers Can the VCR indefinitely remain in the still mode?Symptom Possible Cause TroubleshootingRecording Other Problems Record a Programme While Watching Another 424Memo Memo Memo HR-S7955EK