JVC HR-S7955EK manual Recording

Page 70

70

subsidiary information

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

RECORDING

1.Recording cannot be started.

2.TV broadcasts cannot be recorded.

3.Tape-to-tape editing is not possible.

4.Camcorder recording is not possible.

5.Uand ,on the display panel won’t stop blinking.

There is no cassette loaded, or the cassette loaded has had its record safety tab removed.

L-1, L-2, F-1, S-1 or SAT has been selected as the input mode.

The source (another VCR, camcorder) has not been properly connected.

All necessary power switches have not been turned on.

The input mode is not correct.

The camcorder has not been properly connected.

The input mode is not correct.

The end of the tape was reached during Recording.

Insert a cassette, or using adhesive tape, cover the hole where the tab was removed.

Set to the desired preset.

Confirm that the source is prop- erly connected.

Confirm that all units’ power switches are turned on.

Set the input mode to L-1, L-2, F-1 or S-1.

Confirm that the camcorder is properly connected.

Set the input mode to L-1, L-2, F-1 or S-1.

The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

TIMER RECORDING

1.

Timer recording won’t work.

2.

Timer programming is not

 

possible.

The clock and/or the timer have been set incorrectly.

The timer is not engaged.

Timer recording is in progress.

Re-perform the clock and/or timer

settings.

Press cand confirm that cis displayed on the display panel.

Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.

3. con the display panel won’t

stop blinking.

4. c, Uand ,on the display

panel won’t stop blinking.

The timer is engaged but there’s no cassette loaded.

The loaded cassette has had its record safety tab removed.

The end of the tape was reached during timer recording.

Load a cassette with the record safety tab intact.

Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact.

The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

Image 70
Contents HR-S7955EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Display Remote control Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup  pg Video Connection Is vacant and have set the VCR to Auto SetupThree-Step Quick Start Consult your local JVC dealerPress Preset DownloadOr E Go straight to 2000 used as example only Check the ResultsFinish Off Perform Clock Set on Go to StepWelcome to jvc Basic Features Play PlaybackLoad a Video Cassette Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPause During Playback Playback FeaturesAdvanced JOG Dial Single Frame MovementYou can use variable speed search with one of two methods Variable Speed SearchHigh Speed Search NormalSet the Tape Speed RecordingChoose a Programme Start RecordingDisplay Tape Remaining Time Check Elapsed Recording Time and Reset ItChange Display Information Instant Timer Recording Recording Resume FunctionGet to the Video Plus + Screen Video Plus + Timer ProgrammingEnter the PlusCode Number Delayed, your VCR will still record it properly Programme stop time, then the date and presetMake sure that the preset number displayed is Leave the satellite receiver’s power onEdit Programme Title Engage Timer ModeReturn to Normal Screen Enter Programme Details Express Timer ProgrammingGet to the Programme Screen Press pthen press Start + Display panel looks like thisPress the number key 24H Express Timer Programming Press c, then press oto disengage the timer mode Check, Cancel & Change ProgrammesEdit programme title Press the number key When Programmes Overlap Each Other Then pressAdvanced Features Digital 3R Picture QualityManual Tracking Digital TBC/NRVideo Stabilizer Picture ControlTape Type Super VHS ET S-VHS ETYour VCR can record in S-VHS, S-VHS ET or VHS Super VHS S-VHS, S-VHS ET and VHSSee ‘Super VHS ET S-VHS ET’ on Avoiding B.E.S.T. Time Delay Recording and Playback Using B.E.S.TTurning B.E.S.T. on or OFF Nicam Stereo and Bilingual Broadcasts Sound ModesSoundtrack Selection Index Search Finding Specific ScenesSkip Search Instant ReViewProgramme Navigation If the VCR cannot detect the tape information, ‘NO TapeNavigation Playback Turn Off NavigationEnter programme title Press the number keys and Eto Entering CharacterPress the number key 1. The Title Edit screen appears Character’ belowDelete Tape Data Link Functions TV Auto Power OnYou can use your TV’s Remote Control to turn off the VCR NexTView LinkDirect Rec SET using the Aand Bbuttons and pressHighlight bar to Mode Recording onSatellite Receiver Control Settings Installing Satellite ControllerAfter pressing Mode Setting satellite receiver’s brandSET using the Aand Bbuttons. Press Or E Appropriate number keys to enter the brandCheck Result of Test Or E to finish the Sat Control Set modePress the Aand Bbuttons to move Auto Satellite Auto Record from Satellite ReceiverAdvanced features Editing OUTPUT/INPUT SettingDesired mode Buttons. Press OK / or E to selectSELECT/INPUT Setting For L-2 SelectEditing Using Another VCR Set edit mode See Picture Control onYour VCR as the Player Editing from a Camcorder Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerRepeat Playback Auto TimerAuto Power Off/3H Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorVideo Channel Set Access Video Channel ModeExit Video Channel Set Mode Set Video ChannelAuto Channel Setup Mark on the screen movesManual Channel Setup Press Or EChange Station Name Delete a ChannelChange Station Preset Position Button on the Remote Control until the item you want toFine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Or E. The date Setting the ClockOr E. Set the correct year Manually Setting Guide Program Numbers Guide Program NumbersCan the VCR indefinitely remain in the still mode? Uand cremain lit on the display panel. Is there a problem?Question and Answers Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRecording Other Problems 424 Record a Programme While Watching AnotherMemo Memo Memo HR-S7955EK