66
advanced features
Clock Set
You should only need to perform this function if:
•Auto Clock Set was not performed correctly by Auto Setup or Preset Download
•The VCR’s memory backup has expired
•You want to change the Just Clock setting
Setting the Clock
get to the initial set screen Press m. Move the highlight bar to INITIAL SET using the
Aand Bbuttons and press | 3 | OK / | (or E). |
|
|
|
get to the clock set screen Move the highlight bar to CLOCK SET using the Aand
Bbuttons and press | 3 | OK / | (or E). |
|
|
|
set time and date When the CLOCK SET screen appears, the time will be blinking. Use the Aand Bbuttons to set the correct time (pressing and holding will advance the time in
30 minute increments) and then press | 3 | OK / | (or E). The date |
|
|
|
will blink. Use the Aand Bbuttons to set the correct date (pressing and holding will advance the date in 15 day incre-
ments) and then press | 3 | OK / | (or E). Set the correct year in the | ||
same way and press |
|
|
|
| |
3 | OK / | . |
| ||
|
|
|
|
| CLOCK SET | |
TIME | DATE | YEAR |
0: 00 | 01 . 01 | 02 |
| JUST CLOCK | : ON |
| TV PR. | : 1 |
[1] a k [MENU]: EXIT
set just clock Set as desired using the Aand B
buttons then press | 3 | OK / | (or E). |
|
|
|
set preset for clock data source If you have set JUST CLOCK to ON, you will need to specify a preset (station) for JUST CLOCK to take its source data from. Use the Aand B
buttons to select the preset and press | 3 | OK / | (or E). |
|
|
|
start clock operation Press m.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use this signal to update its internal clock (including the adjustment for British Summer Time). It will do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to ON, you are enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
•when the VCR is powered on
•when the VCR is in Timer or Auto Satellite Programme Recording modes
•when a difference of more than 3 minutes between the internal clock and the time signal exists.
•when reception conditions are poor.
•when