JVC HR-S7955EK manual Manual Channel Setup, Press Or E

advanced features

61

Manual Channel Setup

get to the confirmation screen Press m. Move the highlight bar to MANUAL CH SET using the Aand Bbuttons

and press 3 OK / (or E).

MAIN MENU

PROGRAMME NAVIGATION

MODE SET AUTO CH SET

FMANUAL CH SET OUTPUT/INPUT SET INITIAL SET

[1] a k [MENU]: EXIT

	select position Use the						M		button on the Remote Control to move the highlight bar
											3 OK	/	.
								to a vacant position then press
		PR	CH	ID	PR	CH ID		In this example, we have chosen position 6.
01			26	BBC1	08	- - - -
02			33	BBC2	09	- - - -		select band When the MANUAL
03			23	ITV	10	- - - -
04			30	CH4	11	- - - -
05			37	CH5	12	- - - -		CH SET screen appears, press the
		06		- - - -	13	- - - -
07				- - - -	14	- - - -		Aand Bbuttons to						PR	CH	ID	FINE	DECODER
		[10]												06	CH2	- - - -	+/–	ON
		ak: EDIT						change the band between CH
		a[x]: DELETE
		[MENU]: EXIT						(regular) and CC (cable).
														[1]: SELECT
														[0]: CURSOR g
														k: OK
								input channel number		Press				[MENU]: EXIT

the Ebutton and you will see the channel number space flash-

ing. Use the number keys to enter the Channel Number that you want to store.

input channel id Press the Ebutton to move to the Channel ID space and use the A and Bbuttons to select the required ID from the stored list.

fine tuning Press the Ebutton repeatedly to move to the Fine Tuning ‘+/–’ and use the Aand Bbuttons to fine-tune the channel. A ‘+’ or a ‘–’ symbol will appear during this process.

select decoder setting When receiving a setambled broadcast with a decoder connectod to the AV2 (L-2) IN/DECODER connector, set L-2 SELECT to DECODER (☞ pg. 51) and set DECODER setting to ON. When L-2 SELECT is set to A/V or SAT, the DECODER setting cannot be changed.

save new channel details Press 3 OK / to save the details you have just entered. The Confir-

mation Screen will appear again. Repeat the above procedure from Select Position onwards as many times as required.

close confirmation screen Press m.