JVC HR-S7955EK Editing, OUTPUT/INPUT Setting, Buttons. Press OK / or E to select, Desired mode

50

advanced features

Editing

L-1 OUTPUT/INPUT Setting

The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-1 OUTPUT and L-1 INPUT to the appro- priate mode depending on the type of unit connected to the rear panel AV1 (L-1) IN/OUT connector of this VCR.

get to the output/input set screen Press m. Move the highlight bar to

OUTPUT/INPUT SET using the Aand Bbuttons and press					3	OK /	(or E).
select mode Move the highlight bar to L-1
OUTPUT or L-1 INPUT using the Aand B				OUTPUT/INPUT SET
buttons. Press		OK / (or E) to select the
	3		FL-1	OUTPUT			VIDEO
desired mode:			L-1	INPUT			VIDEO
			L-2	SELECT			A/V
FOR L-1 OUTPUT			L-2	INPUT			VIDEO
• VIDEO : If a connected device’s input is
			[1] a k
			[MENU]: EXIT
compatible only with regular
video signals, set to VIDEO.

•S-VIDEO : If a connected device’s input is compatible with Y/C signals, set to

S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

FOR L-1 INPUT

•VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.

•S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

return to normal screen Press m.

NOTES:

•If L-1 OUTPUT is set to S-VIDEO, it is impossible to set L-1 INPUT to S-VIDEO.

•If L-2 SELECT is set to DECODER, it is impossible to set L-1 INPUT to S-VIDEO.