52
advanced features
Editing Using Another VCR
connect up Connect the player’s
AWhen using your VCR as the player ...
... connect its AV1
BWhen using your VCR as the recorder ...
... connect its AV2
If another VCR is compatible with Y/C signal ...
... When using your VCR as the player, set
... When using your VCR as the recorder, set
set vcr’s input mode The recording VCR mode must be set to AUX. If this VCR is the recorder, press AUX and/or PR to select
•When using the AV2
set edit mode See Picture Control on page 33.
start source vcr Engage its PLAY mode.
start recording vcr Engage its RECORD mode.
NOTES:
•All necessary cables can be obtained from your dealer.
•For Y/C signal input/output, be sure to use a
•When you set PICTURE CONTROL to EDIT to dub tapes ( pg. 33), be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.
•If you are using another VCR with
When using your VCR as the player ...
... connect its rear panel S OUT and AUDIO OUT connectors to the recording VCR’s
When using your VCR as the recorder ...
... connect its front panel