JVC HR-S7955EK manual Auto Channel Setup, Mark on the screen moves

Page 60

60

advanced features

Tuner Set

The VCR needs to find, identify and memorise all available stations in your area in order to record programmes correctly. Once done, pressing the PR + or - buttons enables you to jump to the available channels without going via any vacant channels. This channel search can be done either automatically or manually. You should only need to perform either of the following procedures if Auto Setup or Preset Download has failed to identify and record available channels or you have moved to a new area.

Auto Channel Setup

get to the main menu Press m.

perform auto channel set Move the highlight bar to AUTO CH

SET using the Aand Bbuttons and press

3

OK /

(or E).

 

 

 

rf and scart connection If you have chosen to connect the VCR to the TV with both the RF Cable and a 21-pin SCART Cable (not provided) and the TV set is in its AV mode (see the TV manual), the AUTO SET screen will appear on the TV and remains there for about 4–12 minutes while the VCR searches for receivable

stations. During Auto Channel Set the S from left to right.

MAIN MENU

PROGRAMME NAVIGATION

MODE SET

FAUTO CH SET

MANUAL CH SET

OUTPUT/INPUT SET

INITIAL SET

[1] a k [MENU]: EXIT

mark on the screen moves

AUTO SET

PLEASE WAIT

The caption SCAN COMPLETED appears at the end of the process for about 5 seconds.

[MENU]:EXIT

confirmation screen Once Auto Channel Set has completed its search, the confirmation screen will appear showing the details (PR

=Preset Number, CH = Channel Number and ID = Station Name) of the TV stations that the process has found. The first station will have a highlight bar over it and will be blinking. This screen and the programme currently being broadcast on the selected station will alternate at 8 second intervals. To view the next channel, press the Aand Bbuttons to move the highlight bar to the required channel.

PR

CH

ID

PR

CH

ID

01

26

BBC1

08

 

- - - -

02

33

BBC2

09

 

- - - -

03

23

ITV

10

 

- - - -

04

30

CH4

11

 

- - - -

05

37

CH5

12

 

- - - -

06

 

- - - -

13

 

- - - -

07

 

- - - -

14

 

- - - -

[10] ak: EDIT

a[x]: DELETE [MENU]: EXIT

return to normal screen Press m.

NOTES ON CHANNEL RECEPTION

incorrect station id In certain reception conditions, station names may not be stored correctly by the VCR and Auto Guide Program Number Set may not work properly. If the Guide Program Numbers are not set, entering PlusCode numbers, may result in an incorrect channel being recorded.

poor reception The VCR memorises all stations found regardless of their quality. If a station’s quality is poor, you can delete that station from the memory (see page 62).

Page 59 Page 61
Image 60
Page 59 Page 61
Contents HR-S7955EK Safety Precautions Blue to N Neutral or Black Brown to L Live or RedMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Display Remote control Diagram Key Front PanelWelcome to JVC Getting Everything ReadyPerform Auto Setup  pg Video Connection Auto Setup Three-Step Quick StartIs vacant and have set the VCR to Consult your local JVC dealerPreset Download PressOr E Check the Results Finish OffGo straight to 2000 used as example only Perform Clock Set on Go to StepWelcome to jvc Basic Features Playback Load a Video CassettePlay Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPlayback Features Advanced JOG DialPause During Playback Single Frame MovementVariable Speed Search High Speed SearchYou can use variable speed search with one of two methods NormalRecording Choose a ProgrammeSet the Tape Speed Start RecordingCheck Elapsed Recording Time and Reset It Display Tape Remaining TimeChange Display Information Instant Timer Recording Recording Resume FunctionVideo Plus + Timer Programming Get to the Video Plus + ScreenEnter the PlusCode Number Programme stop time, then the date and preset Make sure that the preset number displayed isDelayed, your VCR will still record it properly Leave the satellite receiver’s power onEngage Timer Mode Edit Programme TitleReturn to Normal Screen Express Timer Programming Get to the Programme ScreenEnter Programme Details Press pthen press Start + Display panel looks like thisPress the number key 24H Express Timer Programming Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeEdit programme title Press the number key When Programmes Overlap Each Other Then pressAdvanced Features Picture Quality Manual TrackingDigital 3R Digital TBC/NRVideo Stabilizer Picture ControlTape Type Super VHS ET S-VHS ETSuper VHS S-VHS, S-VHS ET and VHS Your VCR can record in S-VHS, S-VHS ET or VHSSee ‘Super VHS ET S-VHS ET’ on Recording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayTurning B.E.S.T. on or OFF Sound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Finding Specific Scenes Skip SearchIndex Search Instant ReViewProgramme Navigation If the VCR cannot detect the tape information, ‘NO TapeNavigation Playback Turn Off NavigationEntering Character Press the number key 1. The Title Edit screen appearsEnter programme title Press the number keys and Eto Character’ belowDelete Tape Data TV Auto Power On You can use your TV’s Remote Control to turn off the VCRLink Functions NexTView LinkSET using the Aand Bbuttons and press Highlight bar to ModeDirect Rec Recording onSatellite Receiver Control Settings Installing Satellite ControllerSetting satellite receiver’s brand SET using the Aand Bbuttons. Press Or EAfter pressing Mode Appropriate number keys to enter the brandOr E to finish the Sat Control Set mode Check Result of TestPress the Aand Bbuttons to move Auto Satellite Auto Record from Satellite ReceiverAdvanced features OUTPUT/INPUT Setting Desired modeEditing Buttons. Press OK / or E to selectSELECT/INPUT Setting For L-2 SelectEditing Using Another VCR Set edit mode See Picture Control onYour VCR as the Player Editing from a Camcorder Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerAuto Timer Auto Power Off/3HRepeat Playback Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorAccess Video Channel Mode Exit Video Channel Set ModeVideo Channel Set Set Video ChannelAuto Channel Setup Mark on the screen movesManual Channel Setup Press Or EChange Station Name Delete a ChannelChange Station Preset Position Button on the Remote Control until the item you want toFine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Setting the Clock Or E. The dateOr E. Set the correct year Manually Setting Guide Program Numbers Guide Program NumbersUand cremain lit on the display panel. Is there a problem? Question and AnswersCan the VCR indefinitely remain in the still mode? Can the VCR indefinitely remain in the Record-Pause mode?Troubleshooting Symptom Possible CauseRecording Other Problems 424 Record a Programme While Watching AnotherMemo Memo Memo HR-S7955EK
Top Page Image Contents