JVC HR-S7955EK manual SELECT/INPUT Setting, For L-2 Select

• SAT

L-1 OUTPUT

L-1 INPUT

FL-2 SELECT

L-2 INPUT

[1] a k [MENU]: EXIT

advanced features

L-2 SELECT/INPUT Setting

51

The AV2 (L-2) IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-2 SELECT to the appropriate mode depending on the type of unit connected to the rear panel AV2 (L-2) IN/DECODER connector of this VCR. Set L-2 INPUT to the appropriate mode depending on the output signals of the connected unit.

get to the output/input set screen Press m. Move the highlight bar to

OUTPUT/INPUT SET using the Aand Bbuttons and press 3 OK / (or E).

select mode Move the highlight bar to L-2 SELECT or L-2 INPUT using the Aand B

buttons. Press 3 OK / (or E) to select the

desired mode:

OUTPUT/INPUT SET

VIDEO

VIDEO

A/V

VIDEO

FOR L-2 SELECT

• A/V : To use this VCR as the re- corder with the player con- nected to the AV2 (L-2) IN/ DECODER connector, or to use the satellite receiver connected to the AV2 (L-2) IN/DECODER connector.

•DECODER : To use a decoder connected to the AV2 (L-2) IN/DECODER

connector.

: To view a satellite programme with the TV set while the VCR is turned off. (
pg. 48)

FOR L-2 INPUT

•VIDEO : If a connected device’s output is compatible only with regular video signals, set to VIDEO.

•S-VIDEO : If a connected device’s output is compatible with Y/C signals, set to S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

return to normal screen Press m.

NOTES:

•If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/ DECODER connector, be sure to set L-2 SELECT back to appropriate mode after editing.

•If you’re not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/ DECODER connector, leave L-2 SELECT set to A/V.

•The default setting is A/V; if the VCR’s memory backup has expired due to a power cut or because the AC was removed from the VCR, A/V will be auto- matically selected when the power is restored to the VCR. If you are using a satellite receiver or a decoder, be sure to set L-2 SELECT back to appropriate mode.

•When L-2 SELECT is set to SAT, ‘SAT’ appears on TV screen instead of ‘L-2’, or on the display panel instead of ‘L2’.

•If L-2 SELECT is set to DECODER, it is impossible to set L-2 INPUT to S-VIDEO.

•If L-1 OUTPUT is set to S-VIDEO, it is impossible to set L-2 SELECT to DECODER.