JVC RX-774RBK manual Receiving Radio Broadcasts, Tuning in Stations Manually, Using Preset Tuning

English

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

	IMPORTANT:
AUDIO/TV	When using the Remote Control, check to see if its remote control
/VCR	mode selector is set to the correct position:
/DBS	To operate this receiver, set it to “AUDIO/TV/VCR (except when
CATV
	selecting the DBS tuner as the source).”

Tuning in Stations Manually

On the front panel only:

1.Press FM/AM TUNING to select the band. Each time you press the button, the band alternates between FM and AM (MW/LW).

2.Turn MULTI JOG until you find the frequency you want.

•Turning it clockwise increases the frequency.

•Turning it counterclockwise decreases the frequency.

FM/AM TUNING

MULTI JOG

Notes:

•When you turn MULTI JOG quickly in step 2, the frequency keeps changing until a station is tuned in.

•When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

When an FM stereo program is received, the STEREO indicator also lights up.

Using Preset Tuning

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 40 stations at random.

To store the preset stations

On the front panel only:

1.Tune in the station you want to preset (see above). If you want to store the FM reception mode for this station, select the FM reception mode you want. See page 29 for details.

2.Press TUNER/SEA MEMORY.

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

3.Turn MULTI JOG to select a channel number while the channel number position is flashing.

TUNER/SEA MEMORY

MULTI JOG

Note:

You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for tuner, not for the CD and others. (See page 67.)

27