JVC RX-774RBK Using the SEA Modes, Creating Your Own SEA Mode, To recall your own SEA adjustment

Using the SEA Modes

English

Creating Your Own SEA Mode

You can adjust and store your own SEA adjustment into memory (SEA USERMODE).

On the front panel only:

If you do not want to store your adjustment, but rather want to adjust the SEA temporarily, skip step 4 below.

1.Press SEA ADJUST repeatedly until the frequency range (100Hz, 1kHz or 10kHz) you want appears on the display.

SEA ADJUST

S E A FR

VOLUME

100 1k 10k

S E A FR

VOLUME

100 1k 10k

2.Turn MULTI JOG to adjust the SEA level of the selected frequency range, while the indication of the previous step is still on the display.

•Turning it clockwise increases the level.

•Turning it counterclockwise decreases the level.

This FR means this adjustment can be applied to the FRont speakers only.

S E A FR

MULTI JOG

100 1k 10k

3. Repeat step 1 and 2 to adjust other frequency ranges if necessary.

4.Press TUNER/SEA MEMORY, while the indication of the previous step is still on the display.

Your adjustment is stored into SEA USERMODE.

To recall your own SEA adjustment

See page 36.

To erase a stored adjustment

TUNER/SEA MEMORY

Storing a new adjustment into SEA USERMODE erases the previously stored one.

37