JVC RX-774RBK Using the DVD Multi Playback Mode, Speaker Arrangements for DVD Multi Playback

English

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD player.

Before playing back a DVD, refer also to the manual supplied with the DVD player.

Speaker Arrangements for DVD MULTI Playback

The following illustrations show how to obtain the optimum sound environment for the DVD MULTI playback mode. Try to find the speaker direction and location to create the optimum sound field.

When you play back a disc on the DVD player with its analog discrete output mode selected:

Left front	Sub-	TV	Right front
	woofer
speaker			speaker
		Center speaker

Left	Right
rear	rear
speaker	speaker

Note:

You can place the subwoofer anywhere around you.

Activating the DVD MULTI Playback

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output mode on the DVD player.

Once you made adjustments, the receiver memorizes the adjustments until you change them. You also need to set the DVD player to the analog discrete output mode.

On the front panel:

1.Press DVD MULTI/2CH so that “DVD MULTI” appears on the display.

2.Select the analog discrete output mode on the DVD player, and start playing a DVD.

• Refer to the manual supplied with the DVD player.

If you need to make any adjustment, go to the following steps.

3.Press BALANCE/SURROUND ADJUST repeatedly until “CENTER LEVEL” appears on the display. The display changes to show the current setting.

DVD MULTI/2CH

BALANCE/SURROUND

ADJUST

Note:

When you select “DVD MULTI” as the source to play, the DSP modes are canceled temporarily.

Note:

You cannot adjust the center speaker level when “CENTER SPK” is set to “NONE” (see page 24).

49