JVC RX-774RBK manual Using the On-Screen Menus, Selecting the Source to Play Also see

Using the On-Screen Menus

You can use the Menus on the TV screen to control the receiver.

To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 15), and set the TV’s input mode to the proper position to which the receiver is connected.

English

Selecting the Source to Play (Also see page 20)

1.Press any button of ON SCREEN CONTROL %/ Þ / @/ #once. The MAIN MENU appears on the TV.

MAIN MENU

Shows the buttons you can use on the current menu.

In this case, use % / Þ to move up and down, and @ / # to select, adjust or set the item.

2.Press ON SCREEN CONTROL %/ Þto move to “SOURCE.”

3.Press ON SCREEN CONTROL @/ # to select the source.

4.When you finish, press EXIT. The menu disappears from the TV.

Selecting the Different Sources for Picture and Sound

You can view the pictures played back on a video component while listening to any source.

1.Press any button of ON SCREEN CONTROL %/ Þ / @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL %/ Þto move to “VISUAL.”

3.Press ON SCREEN CONTROL @/ # to select a different video source.

• When you select “OSD,” see page 61.

4.When you finish, press EXIT. The menu disappears from the TV.

Using the DSP Modes (Also see pages 39, 41, and 44)

1.Press any button of ON SCREEN CONTROL %/ Þ / @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL %/ Þto move to “MODE.”

3.Press ON SCREEN CONTROL @/ # to select the DSP mode you want to use.

4.When you finish, press EXIT. The menu disappears from the TV.

Notes:

•If your TV is not of the PAL color system, the TV screen will be distorted.

•The on-screen display will disappear if no operation is done for about 1 minute.

MAIN MENU

MAIN MENU

52