JVC RX-774RBK manual Press Rearl +/- to adjust the rear speaker output level

Using the DSP Modes

English

From the remote control:

1.Press SURROUND MODE repeatedly until the mode you want appears on the display.

The DSP indicator also lights up on the display.

Each time you press the button, the DSP modes change as follows (the indicator of the selected DSP mode also lights up on the display):

SURROUND

MODE

Notes:

• When you select “DVD MULTI”

as the source to play, you

cannot select the DAP modes.

• The DAP mode is not used

with the other DSP modes

such as the Dolby Pro Logic

PRO LOGIC THEATER LIVE CLUBDANCE CLUB HALL

OFF				PAVILION
	3D THEATER	3D DRAMA	3D ACTION	HEADPHONE

and 3D-PHONIC mode. When

the DAP mode is turned on,

the other DSP mode, if used,

will be turned off.

If you need to make any adjustment, go to the following steps.

2.Press SOUND CONTROL.

10 keys are activated for sound adjustments.

3.Press REAR•(L) +/– to adjust the rear speaker output level.

•Pressing REAR•(L) – decreases the output level up to –10 dB.

•Pressing REAR•(L) + increases the output level up to +10 dB.

SOUND

CONTROL

ENTER REAR(L)

5 6

Note:

When you select “HEADPHONE” (the HEADPHONE indicator lights up), you cannot go to the following steps. No adjustments can be made for “HEADPHONE.”

EFFECT

4. Press EFFECT to select the effect level.				7/P
Each time you press the button, the effect level changes
as follows:
DSP EFFECT 1	DSP EFFECT 2		DSP EFFECT 3
DSP EFFECT 5		DSP EFFECT 4

As the number increases, the selected DAP mode becomes stronger.

To cancel the DAP mode

Press SURROUND MODE repeatedly until “OFF” appears.

The DSP indicator goes off from the display.

Notes:

•You cannot adjust the left and right rear speaker output level separately.

•You cannot adjust the rear speaker level when “REAR SPK” is set to “NO” (see page 25).

Note:

Once you have adjusted the DAP modes, the adjustment is memorized for each DAP mode.

43