JVC 0302MNV*ID*JVE Select the language, Perform Auto Set Up, Confirm/Set video channel

Page 11

EN 11

C Select the language.

Press OK. The Language Set display appears on the TV screen.

Press rt to move the highlight bar (pointer) to the language of your choice.

(Example) DEUTSCH is selected.

D Perform Auto Set Up.

Press OK.

“Auto” blinks on the front display panel; do NOT press any button on the recorder or remote control until the front display panel shows clock time, “(CH) 1” or

“– –:– –” as illustrated on page 12.

●If you are using the on-screen display, the AUTO SET

screen will appear. As Auto Set Up progresses, the “q” mark on the TV screen moves from left to right.

BeginningEnd

E Confirm/Set video channel.

With RF connection

The video channel that is shown on the display panel is your video channel. Press OK.

●If you have selected

MAGYARORSZÁG, CESKÁ REPUBLIKA, POLSKA or OTHER EASTERN EUROPE in step 2 on page 10, “2” appears instead of “1”.

●To view picture signals from the recorder, set your TV to the video channel.

With AV connection Press PR – until the display panel shows “1 – –” (or “2 – –”). Now the video channel is set to off. Then press OK.

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s memory backup has expired, all the stored stations and their Guide Program numbers remain in the recorder’s memory and the recorder will not perform Auto Set Up again. You only need to set the clock. ( pg. 46)

If you have moved to a different area, perform each setting as required.

●Video channel setting (for RF connection users)  pg. 48

●Tuner setting  pg. 40

●Clock setting  pg. 46

If a new station starts broadcasting in your area, perform tuner setting ( pg. 40) and, if necessary, video channel setting ( pg. 48).

NOTES:

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the recorder can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again from step 1.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 43, “INFORMATION”).

●To view picture signals from the recorder, set your TV to its AV mode.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVSelect your country Auto Set Up10 EN Turn on the recorderWith RF connection Perform Auto Set UpSelect the language Confirm/Set video channelJust Clock Results of Auto Set Up appear on the front display panel12 EN Language for the on-screen displayReturn to the normal screen Access the Main Menu screenAccess the Country Set screen Language14 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 16 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking18 EN Tape Remaining Time Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode20 EN Super VHS ET S-VHS ETRecording Playback22 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users24 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionPress # TIMER, then press Disengage the timer modeAccess the Programme Check screen Press # Timer Cancel or change a programmeReturn to the timer mode 28 EN Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recorders30 EN Output SettingIN/OUT connector Select the input mode for the L-2 Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode34 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeMinimizes picture degradation during editing recording Is powered back onOn or OFF  pg Preference. Normally select AutoWhile the recorder is turned off Entire programme while timer-recording in SP mode38 EN For ExampleAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENView the Confirmation screen Perform Auto Channel SetManual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 44 ENSet Stations a Station Name TV Station And ID List46 EN Access the Initial Set screenAccess the Clock Set screen Clock SetStart the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data48 EN Video Channel SetEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program Number50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN S.T. Picture System Auto Channel Set Auto Set UpExpress Timer Programming Tape Position Indicator Tape Remaining Time
Top Page Image Contents