JVC LPT0649-001B, 0302MNVIDJVE specifications 54 EN

Page 54

54 EN

SPECIFICATIONS

GENERAL

Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on	: 18 W
Power off	: 3.3 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)
	: 400 mm x 94 mm x 270 mm
Weight	: 3.2 kg
Format	: S-VHS/VHS PAL standard
Maximum recording time
(SP)	: 240 min. with E-240 video cassette
(LP)	: 480 min. with E-240 video cassette

VIDEO/AUDIO

Signal system	: PAL-type colour signal and CCIR
	monochrome signal, 625 lines
	50 fields
Recording system	: DA4 (Double Azimuth) head helical
	scan system
Signal-to-noise ratio: 45 dB
Horizontal resolution
	: 250 lines (VHS)
	400 lines (S-VHS)
Frequency range	: 70 Hz to 10,000 Hz (Normal audio)
	20 Hz to 20,000 Hz (Hi-Fi audio)
Input/Output	: 21-pin SCART connectors:
	IN/OUT x 1, IN/DECODER x 1
	RCA connectors:
	VIDEO IN x 1, AUDIO IN x 1,
	AUDIO OUT x 1

TUNER/TIMER

TV channel storage capacity

	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 47 MHz – 89 MHz/
	104 MHz – 300 MHz/
	302 MHz – 470 MHz
	UHF 470 MHz – 862 MHz
Aerial output	: UHF channels 22 – 69 (Adjustable)

Memory backup time

: Approx. 10 min.

ACCESSORIES

Provided accessories

:RF cable,

Infrared remote control unit, “R6” battery x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

Image 54

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTurn on the recorder Auto Set Up10 EN Select your countryConfirm/Set video channel Perform Auto Set UpSelect the language With RF connectionLanguage for the on-screen display Results of Auto Set Up appear on the front display panel12 EN Just ClockLanguage Access the Main Menu screenAccess the Country Set screen Return to the normal screenBasic Playback 14 ENPause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playbackIndex Search 16 ENVariable Speed Search Skip SearchManual Tracking Next Function MemoryRepeat Playback Soundtrack Selection18 EN Instant Timer Recording ITR Tape Remaining TimeSuper VHS ET S-VHS ET Engage the S-VHS ET mode20 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 22 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 24 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+Disengage the timer mode Access the Programme Check screenPress # TIMER, then press Cancel or change a programme Return to the timer modePress # Timer 28 EN Advantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source playerOutput Setting IN/OUT connector30 EN Select and L-2 Input Setting Select the input mode for the L-2 Decoder connectorConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode34 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPreference. Normally select Auto Is powered back onOn or OFF pg Minimizes picture degradation during editing recordingFor Example Entire programme while timer-recording in SP mode38 EN While the recorder is turned offAbout Ntsc Playback 40 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screen42 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel44 EN Set Stations aSet Stations B TV Station And ID List Station NameClock Set Access the Initial Set screenAccess the Clock Set screen 46 ENSet the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set 48 ENGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program numberTroubleshooting 50 ENRecording Other Problems 52 ENPlayback 54 EN Tape Position Indicator Tape Remaining Time Auto Channel Set Auto Set UpExpress Timer Programming S.T. Picture System