JVC LPT0649-001B, 0302MNVIDJVE specifications Safety Precautions

Page 2

2 EN	SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on pages 2 and 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

●Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

●SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsTurn on the recorder Auto Set Up10 EN Select your countryConfirm/Set video channel Perform Auto Set UpSelect the language With RF connectionLanguage for the on-screen display Results of Auto Set Up appear on the front display panel12 EN Just ClockLanguage Access the Main Menu screenAccess the Country Set screen Return to the normal screenBasic Playback 14 ENPause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playbackIndex Search 16 ENVariable Speed Search Skip SearchManual Tracking Next Function MemoryRepeat Playback Soundtrack Selection18 EN Instant Timer Recording ITR Tape Remaining TimeSuper VHS ET S-VHS ET Engage the S-VHS ET mode20 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 22 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 24 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+Press # TIMER, then press Disengage the timer modeAccess the Programme Check screen Press # Timer Cancel or change a programmeReturn to the timer mode 28 EN Advantages of S-VHS video recorders Set the input mode of recording deckAnother Video Recorder Start the source player30 EN Output SettingIN/OUT connector Select and L-2 Input Setting Select the input mode for the L-2 Decoder connectorConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode34 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPreference. Normally select Auto Is powered back onOn or OFF pg Minimizes picture degradation during editing recordingFor Example Entire programme while timer-recording in SP mode38 EN While the recorder is turned offAbout Ntsc Playback 40 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPerform Auto Channel Set View the Confirmation screen42 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 44 ENSet Stations a TV Station And ID List Station NameClock Set Access the Initial Set screenAccess the Clock Set screen 46 ENSet the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationVideo Channel Set 48 ENGuide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program numberTroubleshooting 50 ENRecording Other Problems 52 ENPlayback 54 EN Tape Position Indicator Tape Remaining Time Auto Channel Set Auto Set UpExpress Timer Programming S.T. Picture System