JVC 0302MNV*ID*JVE Check the contents, Situate the recorder, Connect the recorder to TV

Page 9

INSTALLING YOUR NEW RECORDER

EN 9

Basic Connections

Aerial connector

Back of TV

21-pin SCART

TV aerial

connector

cable

21-pin SCART

 

cable

RF cable

(not provided)

 

(provided)

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 54.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

8To connect to a TV with NO AV input connectors . . .

Mains power cord

Back of recorder

ANT. IN

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector on the rear panel of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

8To connect to a TV with AV input connectors . . .

A Connect the aerial, recorder and TV as per “RF

Connection”.

B Connect an optional 21-pin SCART cable between the

L-1 IN/OUT

RF OUT

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. With AV connection, you can enjoy stereo playback of video tapes if you are using a stereo TV.

NOTES:

●The L-1 IN/OUT connector accepts only a composite signal (regular video signal) and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV’s 21-pin AV input connector (SCART) is compatible with the Y/C signal, set “L-1 OUTPUT” to

“S-VIDEO” after the connection and the initial settings are completed ( pg. 30). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

●For switching the TV’s mode, refer to the instruction manual of your television.

L-1 IN/OUT connector on the rear panel of the

recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 10.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mains10 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpConfirm/Set video channel With RF connection12 EN Results of Auto Set Up appear on the front display panelLanguage for the on-screen display Just ClockAccess the Country Set screen Access the Main Menu screenLanguage Return to the normal screen14 EN Basic PlaybackHigh-Speed Turbo Search Slow MotionPause during playback Activate frame-by-frame playbackVariable Speed Search 16 ENIndex Search Skip SearchRepeat Playback Next Function MemoryManual Tracking Soundtrack Selection18 EN Tape Remaining Time Instant Timer Recording ITR20 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 22 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set24 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Disengage the timer mode Access the Programme Check screenPress # TIMER, then press Cancel or change a programme Return to the timer modePress # Timer 28 EN Another Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerOutput Setting IN/OUT connector30 EN Select the input mode for the L-2 Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections 34 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingOn or OFF  pg Is powered back onPreference. Normally select Auto Minimizes picture degradation during editing recording38 EN Entire programme while timer-recording in SP modeFor Example While the recorder is turned offAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetManual Channel Set 42 ENDelete a Channel When Receiving a Scrambled Broadcast44 EN Set Stations aSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Access the Initial Set screenClock Set 46 ENSet Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation48 EN Video Channel SetGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program number50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Express Timer Programming Auto Channel Set Auto Set UpTape Position Indicator Tape Remaining Time S.T. Picture System
Top Page Image Contents