JVC 0302MNV*ID*JVE, LPT0649-001B Set the VPS/PDC mode, Engage the recorder’s timer mode

Page 23

EN 23

D Set the tape speed.

Press SP/LP (p).

E Set the VPS/PDC mode.

Press VPS/PDC to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is

set to OFF.

 “VPS/PDC Recording” on page 25.

F Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears.

●Repeat steps 1 – 6 for each additional programme.

G Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays.

●To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, “PROGRAM FULL” appears on the TV screen. To record

the extra programme, you must first cancel any unnecessary programmes ( pg. 26).

●It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with “0”.

●If there is a conflict in the timer schedule and one programme overlaps with another, the programme starting earlier or programme with the lower programme number will be recorded.

Satellite Receiver Users

To timer-record a satellite broadcast using the SHOWVIEW system:

ASet “L-2 SELECT” to “A/V” ( pg. 31).

BPerform steps 1 – 7.

CSet the satellite receiver to the appropriate channel before the selected programme begins.

DLeave the satellite receiver’s power on.

ATTENTION

Guide Program Number Set

“GUIDE PROG SET” appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

●Press the number keys or rt to input the channel position number on which your recorder receives that station, then press OK or e to set the Guide Program

number. The SHOWVIEW Program screen appears.

(Example)

To timer-record a ZDF programme with the SHOWVIEW system.

* If your recorder receives ZDF on the channel position 2, press OK or e after entering “2”.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVSelect your country Auto Set Up10 EN Turn on the recorderWith RF connection Perform Auto Set UpSelect the language Confirm/Set video channelJust Clock Results of Auto Set Up appear on the front display panel12 EN Language for the on-screen displayReturn to the normal screen Access the Main Menu screenAccess the Country Set screen Language14 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 16 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking18 EN Tape Remaining Time Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode20 EN Super VHS ET S-VHS ETRecording Playback22 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users24 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionPress # TIMER, then press Disengage the timer modeAccess the Programme Check screen Press # Timer Cancel or change a programmeReturn to the timer mode 28 EN Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recorders30 EN Output SettingIN/OUT connector Select the input mode for the L-2 Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode34 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeMinimizes picture degradation during editing recording Is powered back onOn or OFF  pg Preference. Normally select AutoWhile the recorder is turned off Entire programme while timer-recording in SP mode38 EN For ExampleAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENView the Confirmation screen Perform Auto Channel SetManual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 44 ENSet Stations a Station Name TV Station And ID List46 EN Access the Initial Set screenAccess the Clock Set screen Clock SetStart the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data48 EN Video Channel SetEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program Number50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN S.T. Picture System Auto Channel Set Auto Set UpExpress Timer Programming Tape Position Indicator Tape Remaining Time
Top Page Image Contents