JVC 0302MNV*ID*JVE, LPT0649-001B specifications Select and L-2 Input Setting

Page 31

EN 31

L-2 SELECT and L-2 INPUT Setting

The L-2 IN/DECODER connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the recorder’s L-2 IN/DECODER connector. Set “L-2 INPUT” to the appropriate mode depending on the output signals of the connected appliance.

Perform steps 1 and 2 of “L-1 OUTPUT Setting” on page 30.

A Select the input mode for the L-2 IN/

DECODER connector.

Press rt to move the highlight bar (pointer) to “L-2 SELECT” or “L-2 INPUT”. Then, press OK or e to select the appropriate setting.

*The default setting is bold in the table below.

8L-2 SELECT

A/V: To use this recorder as the recording deck with the player connected to the L-2 IN/DECODER connector, or to use the satellite receiver connected to the L-2 IN/DECODER connector.

DECODER: To use a decoder connected to the L-2 IN/DECODER connector.

SAT: To view a satellite programme with the TV set while the recorder is turned off. ( pg. 32)

8L-2 INPUT

VIDEO: If a connected appliance’s output is compatible only with regular video signals, set to “VIDEO”.

S-VIDEO: If a connected appliance’s output is compatible with Y/C signals, set to “S-VIDEO”. You can obtain high-quality S-VHS picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

B Return to the normal screen.

NOTES:

●If you have a satellite receiver or a decoder connected to the L-2 IN/DECODER connector, be sure to set “L-2 SELECT” back to appropriate mode after editing.

●If you are not connecting a satellite receiver or a decoder to the L-2 IN/DECODER connector, leave “L-2 SELECT” set to “A/ V”.

●The default setting is “A/V”; if the recorder’s memory backup has expired due to a power cut or because the AC was removed from the recorder, “A/V” will be automatically selected when the power is restored to the recorder. If you are using a satellite receiver or a decoder, be sure to set “L-2 SELECT” back to appropriate mode.

●When “L-2 SELECT” is set to “SAT”, “SAT” or “SAt” appears on TV screen or front display panel instead of “L-2” or “L2”.

●If “L-2 SELECT” is set to “DECODER”, it is impossible to set “L-2 INPUT” to “S-VIDEO”.

●If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set “L-2 SELECT” to “DECODER”.

Press MENU.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVSelect your country Auto Set Up10 EN Turn on the recorderWith RF connection Perform Auto Set UpSelect the language Confirm/Set video channelJust Clock Results of Auto Set Up appear on the front display panel12 EN Language for the on-screen displayReturn to the normal screen Access the Main Menu screenAccess the Country Set screen Language14 EN Basic PlaybackActivate frame-by-frame playback Slow MotionHigh-Speed Turbo Search Pause during playbackSkip Search 16 ENVariable Speed Search Index SearchSoundtrack Selection Next Function MemoryRepeat Playback Manual Tracking18 EN Tape Remaining Time Instant Timer Recording ITRReceiving Stereo and Bilingual Programmes Engage the S-VHS ET mode20 EN Super VHS ET S-VHS ETRecording Playback22 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users24 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel positionAccess the Programme Check screen Disengage the timer modePress # TIMER, then press Return to the timer mode Cancel or change a programmePress # Timer 28 EN Start the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersIN/OUT connector Output Setting30 EN Select the input mode for the L-2 Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode34 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeMinimizes picture degradation during editing recording Is powered back onOn or OFF  pg Preference. Normally select AutoWhile the recorder is turned off Entire programme while timer-recording in SP mode38 EN For ExampleAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENView the Confirmation screen Perform Auto Channel SetManual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 44 ENSet Stations B Station Name TV Station And ID List46 EN Access the Initial Set screenAccess the Clock Set screen Clock SetStart the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data48 EN Video Channel SetEnter the Guide Program number Showview System SetupGuide Program Number Set Guide Program Number50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN S.T. Picture System Auto Channel Set Auto Set UpExpress Timer Programming Tape Position Indicator Tape Remaining Time
Top Page Image Contents