JVC 0302MNV*ID*JVE On or OFF  pg, Preference. Normally select Auto, Playback, Is powered back on

Page 37

 

 

EN 37

 

 

* The default setting is bold in the table below.

 

 

8 B.E.S.T.

You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to

ON

“ON” or “OFF” ( pg. 21).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture quality according to your

AUTO

preference. Normally select “AUTO”.

EDIT

AUTO:

Provides the optimised picture benefits of the B.E.S.T. Picture System.

SOFT

EDIT:

Minimizes picture degradation during editing (recording and

SHARP

 

playback).

 

SOFT:

 

Reduces image coarseness when viewing overplayed tapes

 

SHARP:

containing a lot of noise.

 

Clearer, sharper-edged picture when viewing images with lots of flat,

 

 

same-coloured surfaces such as cartoons.

 

NOTES:

 

 

● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until

 

you select another mode.

 

● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish

 

dubbing the tapes.

 

● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from

 

“AUTO” to “NORM”.

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is automatically engaged when the

ON

recorder power is turned off, and automatically disengaged when the recorder

OFF

is powered back on.

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are disabled

 

while the Timer mode is engaged. To disengage the timer, press # (TIMER).

 

 

8 O.S.D.

When this function is set to “ON”, various operational indicators appear on the

ON

TV screen. Messages appear in the selected language ( pg. 12, 13).

OFF

NOTES:

 

 

 

 

● When you use this recorder as the source player for editing, be sure to set “O.S.D.” to

 

“OFF” before starting.

 

● During playback, the operation mode indicators may be disturbed depending on the

 

type of tape being used.

 

 

 

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mains10 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpConfirm/Set video channel With RF connection12 EN Results of Auto Set Up appear on the front display panelLanguage for the on-screen display Just ClockAccess the Country Set screen Access the Main Menu screenLanguage Return to the normal screen14 EN Basic PlaybackHigh-Speed Turbo Search Slow MotionPause during playback Activate frame-by-frame playbackVariable Speed Search 16 ENIndex Search Skip SearchRepeat Playback Next Function MemoryManual Tracking Soundtrack Selection18 EN Tape Remaining Time Instant Timer Recording ITR20 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 22 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set24 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Access the Programme Check screen Disengage the timer modePress # TIMER, then press Return to the timer mode Cancel or change a programmePress # Timer 28 EN Another Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerIN/OUT connector Output Setting30 EN Select the input mode for the L-2 Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections 34 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingOn or OFF  pg Is powered back onPreference. Normally select Auto Minimizes picture degradation during editing recording38 EN Entire programme while timer-recording in SP modeFor Example While the recorder is turned offAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetManual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 44 ENSet Stations B Station Name TV Station And ID ListAccess the Clock Set screen Access the Initial Set screenClock Set 46 ENSet Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation48 EN Video Channel SetGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program number50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Express Timer Programming Auto Channel Set Auto Set UpTape Position Indicator Tape Remaining Time S.T. Picture System
Top Page Image Contents