
ŸDOS Shell
Ÿ Tech Support Form
ŸBattery Rundown
Ÿ View Test Log
ŸPrint Log
ŸSave Log
Ÿ Full Erase Hard Drive
ŸQuick Erase Hard Drive
Power systems checkout
To verify the symptom of the power problem on th puter, do the following:
1.Power off the computer.
2.Remove the battery pack.
3.Connect the AC Adapter.
4.Check that power is supplied when you power computer.
5.Power off the computer.
6.Disconnect the AC Adapter and install the char battery pack.
7.Check that power is supplied by the battery when you power on the computer.
If you suspect a power problem, refer the app power supply check listed below:
Ÿ “Checking the AC Adapter”
Ÿ “Checking operational charging” on page 31
Ÿ“Checking the Battery ASM” on page 31
Checking the | AC | Adapter: | You care here |
because | the | computer | fails only when the AC Adap |
used: |
|
|
|
ŸIf the
power cord of the AC Adapter for correct c and installation.
ŸIf the operational charge does not work, go “Checking operational charging” on page 31.
Unplug the AC Adapter cable from the computer an measure the output voltage at the plug of the A cable. See the following figure:
30 ThinkPad i Series 1400/1500 HMM