22
EN
RECORDING
(cont.)
Recording
Features
TV PROG.
6 |
| 5/8 |
q | 1 | Á |
COUNTER | RESET | DISPLAY |
| ||
|
|
DISPLAY
2
1 2 3
4 | 5 | 6 |
7 8 9
Record One Programme While Watching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.
SELECT CHANNEL TO
WATCH
1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the recorder's TV PROG. buttons is recorded on the tape.
●If a decoder is connected to the recorder (☞ pg. 33), you can select a scrambled channel as well with the TV channel controls.
Elapsed Recording Time Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1 Press DISPLAY until a counter reading appears on the dispay panel.
RESET COUNTER
C.RESET
04
TV PROG.
2 Press C.(COUNTER) RESET before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.
TV/VCR
3 1 
Tape Remaining Time
DISPLAY REMAINING TIME
1 Press DISPLAY until the time remaining on the tape appears.
●By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.
*channel position is not displayed during playback.
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "-