Magnavox MDV560VR warranty Troubleshooting, Moisture Condensation

English

36 Troubleshooting (Continued)

Symptom		Cause		Correction
Some channels are	∀	Those channels were deleted with the	∀	Use CH. ADD/DEL. to restore channels.
skipped over when using		CH. ADD/DEL option.		See “Channel Selection” on page 15.
3/4.
Picture and sound of	∀	Antenna or cables are loose.	∀	Tighten connections or replace cable.
broadcasting channel are
weak or missing.
	∀	Wrong TUNING BAND option is being	∀	Try all TUNING BAND options. See
		used.		“Channel Selection” on page 15 for details.
Camcorder image is not	∀	Camcorder is off. Ensure playback tape is	∀	Turn camcorder on and press PLAY to
shown.		loaded properly.		operate properly. Re-check connections.
Camcorder image via A/V		DVD+VCR SOURCE SELECT is not set to	∀	Press INPUT to select LINE input channel
input to DVD+VCR is not	∀			(LINE1 or LINE2).
shown on TV screen.		LINE1 or LINE2.
Timer recording is not	∀	Clock in DVD+VCR is not set to correct	∀	Set clock to correct time. See “Setting the
		time.		Clock” on page 16.
possible.
	∀	Timer has been programmed	∀	Reprogram Timer. See “Timer Recording”
		incorrectly.		on pages 22 and 23.
	∀	indicator does not appear on	∀	Reprogram Timer.
		DVD+VCR after programming timer.
indicator appears after	∀	DVD+VCR is in Timer Recording mode.	∀	This is the normal indication that the
				DVD+VCR is in TIMER mode.
DVD+VCR is turned off.
Stereo Audio Record	∀	TV is not Stereo-compatible.	∀	No action is possible.
and/or Playback is not	∀	Broadcast program is not in stereo format.	∀	No action is possible.
present.
	∀	DVD+VCR A/V Out jacks are not con-	∀	Make A/V connections. Stereo is
		nected to TV A/V In jacks.		available only via A/V output from
				DVD+VCR.
	∀	DVD+VCR Audio/Video Out is not select-	∀	Select AUX or A/V source as TV input.
		ed for viewing at the TV.
	∀	DVD+VCR BROADCAST TYPE mode is	∀	Set BROADCAST TYPE mode to
		set to SAP or MONO.		STEREO. See “Setting the VCR Setup
				Menu” on page 15.
The "PROGRESSIVE	∀	DVD+VCR was turned ‘ON’ while setting	∀	Press and hold the STOP button for more
		the Progressive scan mode.		than 5 seconds to cancel Progressive mode
SCAN MODE" message
				setting.
remains on-screen.

Moisture Condensation

Moisture condensation can occur:		In locations where moisture condensation may occur:
•	When the DVD+VCR is moved from a cold place to a	•	Keep the DVD+VCR plugged into an AC power outlet
	warm place.		with POWER On. This will help prevent condensation.
•	Under extremely humid conditions.	•	When condensation has occurred, wait a few hours for
			the DVD+VCR to dry before using it.