1. RADAR MAP
1.3Erasing Contents of the Radar Map
1.3.1Erasing the mark/line independently
1.Select CURSOR at MARK ENTRY MODE field on RADAR MAP menu.
2.Press the [MARK] key to show the ENTER MARK menu.
3.Press the [2] key twice to select MARK CANCEL.
4.Operate the trackball to move the cursor to the mark you want to erase.
5.Press the [ENTER] key.
When erasing the line, move the cursor to the starting/ending point. Selecting the connecting point erases both lines connected to it.
Starting/ending point
Erased line
Connecting point
Erased line
1.3.2Erasing all mark/line
You can erase all marks/lines displayed on the current screen, all marks/lines entered before now.
1.Press the [NAV MENU] [1] key in order to show the RADAR MAP menu.
2.Press the [6] key several times to select AREA or ALL.
AREA: Erases all marks/lines within a square which is 20% larger than the effective radar display.
ALL: Erases all marks/lines which you have been entered.
3.Press the [ENTER] key.
Memorizing the mark/line
Marks/lines are stored by using the battery on the RP Board. When the battery is low, the stored marks/lines are erased. After changing the battery, reenter the marks/lines.