Furuno RP-25 manual Preparation, Radar map menu

Page 9

1. RADAR MAP

1.1Preparation

For R-type radar, confirm that the radar display appears. When the video plotter or radar/video plotter display appears, press the [VIDEO PLOT] key several times to select the radar display.

1.Press the [NAV MENU] key to show NAV INFORMATION 1 menu.

2.Press [1] key to show RADAR MAP menu.

[RADAR MAP]

1[NAV INFORMATION 1]

2MAP OFF/ON

3NAV DATA POSN

4ALIGN + CURSOR OFF/ON

5MARK ENTRY MODE CURSOR/L/L/OWN SHIP

6ERASE MARK OFF/AREA/ALL

MEMORY IN USE

MARK = 1000

Number of current used mark/line (Max. 1500 points)

Radar map menu

3.Press [2] key several times to set MAP ON, and then press the ENTER key. “MAP” appears at the right side of screen.

4.Press [NAV MENU] key to close the menu.

1-2

Image 9

Contents Video Plotter 00080745701 Safety Instructions Features ForwordWord to RP-25 Owners Your 2805 spec Radar map Video plotter Iii Table of Contents Initial Settings Radar MAP Keys for radar mapKey panel right side Radar map menu PreparationMaking a Radar Map Selecting the entering wayEnter mark menu Shapes for lines Longitude/LatitudeEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Radar map correction Position and bearing correctionCursor data correction Releasing the radar map correctionOverview Video PlotterKeys for video plotter Selecting DisplaysDisplay modes Sample video plotter displayTrue motion automatic return Chart Cards Displaying chart cardsCard slot location Canceling chart correction Chart position correctionAdding correcting value to cursor data Video plotter 2 menuSetting the navigation data Setting up the Video PlotterHiding/showing graphics Display select menuNav information 1 menu Nav information 3 menu Nav information 2 menuRecording the own ship’s track TrackOwn track plot interval and storage time Own ship plot, target plot menuRecording other ship’s track SmoothingOther target plot interval and storage time Erase menu Erasing trackMarks, Lines Entering markSelecting method of entry Selecting mark Entering independent lines Entering lineErasing Marks, Lines Erasing individual marks/linesErasing marks/lines on a area Erasing all marks Entering waypoints WaypointsEntering waypoints by the cursor Enter wpt, nav line menuEntering waypoints at own ship’s position Waypoint listWpt list menu WPT List Enter WPT, NAV LineDisplaying a waypoint Internal storage waypointWay point menu on selecting video plotter Way point menu on selecting navigation External waypointEntering navigation line Navigation LinesEntering new navigation line Enter nav line menuNavigation line list Adding waypoit to navigation linesRemoving waypoints from navigation lines Deleting navigation lines Deleting individual navigation linesDeleting all navigation lines Nav line menu Video plotter mode Setting up the navigation linesPress the Enter key Press the NAV Menu key to close the menu Displaying navigation lines Recording and Replaying DataFormatting memory RAM card Internal navigation linesRecord card menu Recording dataReplay card menu Replaying dataMaintenance for Technicians Initial SettingsVideo plotter initial setting menu Do not open the equipment Replacement of Battery on RP BoardAP-1 Menu TreeAP-2 AP-3 Latitude Error Table on 96 NM RangeSP-1 Specifications