Furuno RP-25 Erasing Marks, Lines, Erasing individual marks/lines, Erasing marks/lines on a area

Page 28

2. VIDEO PLOTTER

2.6Erasing Marks, Lines

2.6.1Erasing individual marks/lines

1.Select CURSOR at MARK ENTRY MODE on VIDEO PLOTTER 2 menu.

2.Press the [MARK] key to show ENTER MARK menu.

3.Press the [2] key twice to select mark cancel (item 22).

4.Operate the trackball to move the cursor on the mark (starting/ending point of line) which you want to erase.

5.Press the [ENTER] key.

When erasing a line, move the cursor on the starting/erasing point of line. To select the connecting point erases two lines connected to it.

Starting/ending point of line

This line is erased.

Connecting point of lines

These lines are erased.

2.6.2Erasing marks/lines on a area

The following procedure erases all marks and lines within a square which is 20% larger than the effective display area.

1. Press the [NAV MENU] [9] key in order to show ERASE menu.

2-14

Image 28
Contents Video Plotter 00080745701 Safety Instructions Forword FeaturesWord to RP-25 Owners Iii Your 2805 spec Radar map Video plotterTable of Contents Initial Settings Keys for radar map Radar MAPKey panel right side Preparation Radar map menuSelecting the entering way Making a Radar MapEnter mark menu Longitude/Latitude Shapes for linesEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Position and bearing correction Radar map correctionCursor data correction Releasing the radar map correctionVideo Plotter OverviewKeys for video plotter Selecting DisplaysSample video plotter display Display modesTrue motion automatic return Displaying chart cards Chart CardsCard slot location Chart position correction Canceling chart correctionAdding correcting value to cursor data Video plotter 2 menuSetting up the Video Plotter Setting the navigation dataHiding/showing graphics Display select menuNav information 1 menu Nav information 2 menu Nav information 3 menuTrack Recording the own ship’s trackOwn track plot interval and storage time Own ship plot, target plot menuSmoothing Recording other ship’s trackOther target plot interval and storage time Erasing track Erase menuEntering mark Marks, LinesSelecting method of entry Selecting mark Entering line Entering independent linesErasing individual marks/lines Erasing Marks, LinesErasing marks/lines on a area Erasing all marks Waypoints Entering waypointsEntering waypoints by the cursor Enter wpt, nav line menuWaypoint list Entering waypoints at own ship’s positionWPT List Enter WPT, NAV Line Wpt list menuInternal storage waypoint Displaying a waypointWay point menu on selecting video plotter External waypoint Way point menu on selecting navigationNavigation Lines Entering navigation lineEntering new navigation line Enter nav line menuAdding waypoit to navigation lines Navigation line listRemoving waypoints from navigation lines Deleting individual navigation lines Deleting navigation linesDeleting all navigation lines Setting up the navigation lines Nav line menu Video plotter modePress the Enter key Press the NAV Menu key to close the menu Recording and Replaying Data Displaying navigation linesFormatting memory RAM card Internal navigation linesRecording data Record card menuReplaying data Replay card menuInitial Settings Maintenance for TechniciansVideo plotter initial setting menu Replacement of Battery on RP Board Do not open the equipmentMenu Tree AP-1AP-2 Latitude Error Table on 96 NM Range AP-3Specifications SP-1