Furuno RP-25 manual External waypoint, Way point menu on selecting navigation

Page 34

2. VIDEO PLOTTER

External waypoint

The waypoint from the external navigator can be displayed.

1.Press the [NAV MENU], [2] key to show WAY POINT menu.

2.Press the [7] key several times to select NAVIGATION at WPT DATA (item 7) field.

3.Press the [ENTER] key.

[WAY POINT]

1[VIDEO PLOTTER 1]

2WPT OFF/ON

3

4WPT LINE OFF/ON

5WPT NO. OFF/ON

6

7WPT DATA

VIEO PLOTTER/NAVIGATION

8ARRIVAL ALARM

OFF/ON

0.00 NM

Way point menu (on selecting navigation)

4.Press the appropriate key to select ON for showing the waypoint, line and waypoint number.

[2] key: .Showing the waypoint mark

[4]key: Showing the line between own ship and waypoint

[5]key: Showing the waypoint number

5.Press the [ENTER] key.

6.Press the [NAV MENU] key to close the menu.

2-20

Image 34

Contents Video Plotter 00080745701 Safety Instructions Forword FeaturesWord to RP-25 Owners Iii Your 2805 spec Radar map Video plotterTable of Contents Initial Settings Keys for radar map Radar MAPKey panel right side Preparation Radar map menuSelecting the entering way Making a Radar MapEnter mark menu Longitude/Latitude Shapes for linesEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Cursor data correction Position and bearing correctionRadar map correction Releasing the radar map correctionKeys for video plotter Video PlotterOverview Selecting DisplaysSample video plotter display Display modesTrue motion automatic return Displaying chart cards Chart CardsCard slot location Adding correcting value to cursor data Chart position correctionCanceling chart correction Video plotter 2 menuHiding/showing graphics Setting up the Video PlotterSetting the navigation data Display select menuNav information 1 menu Nav information 2 menu Nav information 3 menuOwn track plot interval and storage time TrackRecording the own ship’s track Own ship plot, target plot menuSmoothing Recording other ship’s trackOther target plot interval and storage time Erasing track Erase menuEntering mark Marks, LinesSelecting method of entry Selecting mark Entering line Entering independent linesErasing individual marks/lines Erasing Marks, LinesErasing marks/lines on a area Erasing all marks Entering waypoints by the cursor WaypointsEntering waypoints Enter wpt, nav line menuWaypoint list Entering waypoints at own ship’s positionWPT List Enter WPT, NAV Line Wpt list menuInternal storage waypoint Displaying a waypointWay point menu on selecting video plotter External waypoint Way point menu on selecting navigationEntering new navigation line Navigation LinesEntering navigation line Enter nav line menuAdding waypoit to navigation lines Navigation line listRemoving waypoints from navigation lines Deleting individual navigation lines Deleting navigation linesDeleting all navigation lines Setting up the navigation lines Nav line menu Video plotter modePress the Enter key Press the NAV Menu key to close the menu Formatting memory RAM card Recording and Replaying DataDisplaying navigation lines Internal navigation linesRecording data Record card menuReplaying data Replay card menuInitial Settings Maintenance for TechniciansVideo plotter initial setting menu Replacement of Battery on RP Board Do not open the equipmentMenu Tree AP-1AP-2 Latitude Error Table on 96 NM Range AP-3Specifications SP-1