Furuno RP-25 Maintenance for Technicians, Initial Settings, Video plotter initial setting menu

Page 43

3.MAINTENANCE (FOR TECHNICIANS)

3.1Initial Settings

An item on the DISPLAY SELECT menu can be deleted thru the INITIAL SETTING menu. If it is necessary to change the settings, follow the procedure below.

1.Turn the radar off.

2.Dismount the SPU Board from the display unit, and then on #4 of DIP switch S on the board.

3.Remount the SPU board to the display unit.

4.Turn the radar on.

5.Press the [NAV MENU], [0], [0] key in order to show VIDEO PLOTTER INITIAL SETTING menu.

[VIDEO PLOTTER INITIAL SETTING]

1[VIDEO PLOTTER 2]

2SYMBOL OFF/ON

3COAST LINE OFF/ON

4LAND DENSITY OFF/ON

5PLACE NAME OFF/ON

6MARK OFF/ON

7OWN SHIP PLOT OFF/ON

8TARGET PLOT OFF/ON

9CONTOUR LINE OFF/ON

0GRID OFF/ON

Video plotter initial setting menu

6.Press the appropriate numeric key to select turning on or off item.

7.Press the [ENTER] key.

8.Repeat step 6 and 7 to set the other items.

9.Turn the radar off, and then turn off #4 of DIP switch S1 on the SPU Board arranged at step 2.

3-1

Image 43

Contents Video Plotter 00080745701 Safety Instructions Forword FeaturesWord to RP-25 Owners Your 2805 spec Radar map Video plotter IiiTable of Contents Initial Settings Keys for radar map Radar MAPKey panel right side Radar map menu PreparationSelecting the entering way Making a Radar MapEnter mark menu Longitude/Latitude Shapes for linesEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Releasing the radar map correction Position and bearing correctionRadar map correction Cursor data correctionSelecting Displays Video PlotterOverview Keys for video plotterSample video plotter display Display modesTrue motion automatic return Displaying chart cards Chart CardsCard slot location Video plotter 2 menu Chart position correctionCanceling chart correction Adding correcting value to cursor dataDisplay select menu Setting up the Video PlotterSetting the navigation data Hiding/showing graphicsNav information 1 menu Nav information 3 menu Nav information 2 menuOwn ship plot, target plot menu TrackRecording the own ship’s track Own track plot interval and storage timeSmoothing Recording other ship’s trackOther target plot interval and storage time Erase menu Erasing trackEntering mark Marks, LinesSelecting method of entry Selecting mark Entering independent lines Entering lineErasing individual marks/lines Erasing Marks, LinesErasing marks/lines on a area Erasing all marks Enter wpt, nav line menu WaypointsEntering waypoints Entering waypoints by the cursorEntering waypoints at own ship’s position Waypoint listWpt list menu WPT List Enter WPT, NAV LineInternal storage waypoint Displaying a waypointWay point menu on selecting video plotter Way point menu on selecting navigation External waypointEnter nav line menu Navigation LinesEntering navigation line Entering new navigation lineAdding waypoit to navigation lines Navigation line listRemoving waypoints from navigation lines Deleting individual navigation lines Deleting navigation linesDeleting all navigation lines Nav line menu Video plotter mode Setting up the navigation linesPress the Enter key Press the NAV Menu key to close the menu Internal navigation lines Recording and Replaying DataDisplaying navigation lines Formatting memory RAM cardRecord card menu Recording dataReplay card menu Replaying dataInitial Settings Maintenance for TechniciansVideo plotter initial setting menu Do not open the equipment Replacement of Battery on RP BoardAP-1 Menu TreeAP-2 AP-3 Latitude Error Table on 96 NM RangeSP-1 Specifications