Furuno RP-25 manual Erasing track, Erase menu

Page 24

2. VIDEO PLOTTER

2.4.4Erasing track

The display may become full of track when, for example, own ship traces the same route several times. You can erase all or a percentage of the track to the clear the display. Further, you can erase the tracks of other ships.

1. Press the [NAV MENU], [9] key in order to show ERASE menu.

[ERASE]

1[VIDEO PLOTTER 1]

2OWN SHIP PLOT 30/50/80/ALL

3TARGET PLOT 30/50/80/ALL

4MARKS OFF/AREA/ALL

5WAYPOINT OFF/ALL

6NAV LINES OFF/ALL

Erase menu

2.For own ship’s track erasing, press the [2] key several times to select OWN SHIP PLOT and the amount of track you wish to erase.

For example, 30% erases the oldest 30% of the track points stored in the track memory.

3.Press the [ENTER] key.

4.To erase other ship’s track, press the [3] key to select TARGET PLOT and amount of track to erase.

5.Press the [ENTER] key.

6.Press the [NAV MENU] key to close the menu.

2-10

Image 24
Contents Video Plotter 00080745701 Safety Instructions Features ForwordWord to RP-25 Owners Iii Your 2805 spec Radar map Video plotterTable of Contents Initial Settings Radar MAP Keys for radar mapKey panel right side Preparation Radar map menuMaking a Radar Map Selecting the entering wayEnter mark menu Shapes for lines Longitude/LatitudeEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Position and bearing correction Radar map correctionCursor data correction Releasing the radar map correctionVideo Plotter OverviewKeys for video plotter Selecting DisplaysDisplay modes Sample video plotter displayTrue motion automatic return Chart Cards Displaying chart cardsCard slot location Chart position correction Canceling chart correctionAdding correcting value to cursor data Video plotter 2 menuSetting up the Video Plotter Setting the navigation dataHiding/showing graphics Display select menuNav information 1 menu Nav information 2 menu Nav information 3 menuTrack Recording the own ship’s trackOwn track plot interval and storage time Own ship plot, target plot menuRecording other ship’s track SmoothingOther target plot interval and storage time Erasing track Erase menuMarks, Lines Entering markSelecting method of entry Selecting mark Entering line Entering independent linesErasing Marks, Lines Erasing individual marks/linesErasing marks/lines on a area Erasing all marks Waypoints Entering waypointsEntering waypoints by the cursor Enter wpt, nav line menuWaypoint list Entering waypoints at own ship’s positionWPT List Enter WPT, NAV Line Wpt list menuDisplaying a waypoint Internal storage waypointWay point menu on selecting video plotter External waypoint Way point menu on selecting navigationNavigation Lines Entering navigation lineEntering new navigation line Enter nav line menuNavigation line list Adding waypoit to navigation linesRemoving waypoints from navigation lines Deleting navigation lines Deleting individual navigation linesDeleting all navigation lines Setting up the navigation lines Nav line menu Video plotter modePress the Enter key Press the NAV Menu key to close the menu Recording and Replaying Data Displaying navigation linesFormatting memory RAM card Internal navigation linesRecording data Record card menuReplaying data Replay card menuMaintenance for Technicians Initial SettingsVideo plotter initial setting menu Replacement of Battery on RP Board Do not open the equipmentMenu Tree AP-1AP-2 Latitude Error Table on 96 NM Range AP-3Specifications SP-1