Furuno RP-25 Track, Recording the own ship’s track, Own track plot interval and storage time

Page 22

2. VIDEO PLOTTER

2.4Track

2.4.1Recording the own ship’s track

Own ship’s track can be stored in the memory (Max. 6,000 points). When a track memory becomes full the oldest track is deleted to make room for the latest.

The relation between the own ship track and storage time is shown in the table below.

Own track plot interval and storage time

Plotting interval	Storage time	Plotting interval	Storage time

10 sec	16 hrs 40 min	2 min	200 hrs

30 sec	50 hrs	3 min	300 hrs

1 min	100 hrs	6 min	600 hrs

1.Press the [NAV MENU], [5] key in order to show OWN SHIP PLOT, TARGET PLOT menu.

[OWN SHIP PLOT, TARGET PLOT ]

1[VIDEO PLOTTER 1]

2OWN SHIP PLOT OFF/ON

3OWN SHIP PLOT INTVL

10S/30S/1/2/3/6 MIN

4

5TARGET PLOT OFF/ON

6TARGET PLOT INTVL 10S/30S/1/2/3/6 MIN

7

8SMOOTHING OFF/1/2/3/4/5/6/7/8/9

Own ship plot, target plot menu

2.Press the [2] key several times to select ON at OWN SHIP PLOT (item 2) field.

3.Press the [ENTER] key.

When your ship is at anchor or returning to port you probably will not need to plot (record) the track. In this case, select OFF at step 2.

2-8

Image 22

Contents Video Plotter 00080745701 Safety Instructions Forword FeaturesWord to RP-25 Owners Iii Your 2805 spec Radar map Video plotterTable of Contents Initial Settings Keys for radar map Radar MAPKey panel right side Preparation Radar map menuSelecting the entering way Making a Radar MapEnter mark menu Longitude/Latitude Shapes for linesEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Cursor data correction Position and bearing correctionRadar map correction Releasing the radar map correctionKeys for video plotter Video PlotterOverview Selecting DisplaysSample video plotter display Display modesTrue motion automatic return Displaying chart cards Chart CardsCard slot location Adding correcting value to cursor data Chart position correctionCanceling chart correction Video plotter 2 menu Hiding/showing graphics Setting up the Video Plotter Setting the navigation data Display select menuNav information 1 menu Nav information 2 menu Nav information 3 menuOwn track plot interval and storage time TrackRecording the own ship’s track Own ship plot, target plot menuSmoothing Recording other ship’s trackOther target plot interval and storage time Erasing track Erase menuEntering mark Marks, LinesSelecting method of entry Selecting mark Entering line Entering independent linesErasing individual marks/lines Erasing Marks, LinesErasing marks/lines on a area Erasing all marks Entering waypoints by the cursor WaypointsEntering waypoints Enter wpt, nav line menuWaypoint list Entering waypoints at own ship’s positionWPT List Enter WPT, NAV Line Wpt list menuInternal storage waypoint Displaying a waypointWay point menu on selecting video plotter External waypoint Way point menu on selecting navigationEntering new navigation line Navigation LinesEntering navigation line Enter nav line menuAdding waypoit to navigation lines Navigation line listRemoving waypoints from navigation lines Deleting individual navigation lines Deleting navigation linesDeleting all navigation lines Setting up the navigation lines Nav line menu Video plotter modePress the Enter key Press the NAV Menu key to close the menu Formatting memory RAM card Recording and Replaying DataDisplaying navigation lines Internal navigation linesRecording data Record card menuReplaying data Replay card menuInitial Settings Maintenance for TechniciansVideo plotter initial setting menu Replacement of Battery on RP Board Do not open the equipmentMenu Tree AP-1AP-2 Latitude Error Table on 96 NM Range AP-3Specifications SP-1