Furuno RP-25 manual Displaying a waypoint, Internal storage waypoint

Page 33

2. VIDEO PLOTTER

2.7.3Displaying a waypoint

Internal storage waypoint

1.Press the [NAV MENU], [2] key in order to show WAY POINT menu.

2.Press the [7] key several times to select VIDEO PLOTTER at WPT DATA (item 7) field.

3.Press the [ENTER] key.

[WAY POINT]

1[VIDEO PLOTTER 1]

2WPT OFF/ON

3WPT NO. 00

0000.000 N

000 00.000 E

7WPT DATA

VIEO PLOTTER/NAVIGATION

8ARRIVAL ALARM

OFF/ON

0.00 NM

Way point menu (on selecting video plotter)

4.Press the [2] key several times to select ON at WPT (item 2) field.

5.Press the [ENTER] key.

6.Press the [3] key.

7.Press the numeric key to enter the waypoint no. you want to display in two digits.

8.Press the [ENTER] key. The L/L data and line between own ship and waypoint.

9.Press the [NAV MENU] key to close the menu.

2-19

Image 33

Contents Video Plotter 00080745701 Safety Instructions Features ForwordWord to RP-25 Owners Your 2805 spec Radar map Video plotter IiiTable of Contents Initial Settings Radar MAP Keys for radar mapKey panel right side Radar map menu PreparationMaking a Radar Map Selecting the entering wayEnter mark menu Shapes for lines Longitude/LatitudeEnter Mark menu on selecting L/L OWN Ship Posn Positon Erasing Contents of the Radar Map Radar map correction Position and bearing correctionCursor data correction Releasing the radar map correctionOverview Video PlotterKeys for video plotter Selecting DisplaysDisplay modes Sample video plotter displayTrue motion automatic return Chart Cards Displaying chart cardsCard slot location Canceling chart correction Chart position correctionAdding correcting value to cursor data Video plotter 2 menuSetting the navigation data Setting up the Video PlotterHiding/showing graphics Display select menuNav information 1 menu Nav information 3 menu Nav information 2 menuRecording the own ship’s track TrackOwn track plot interval and storage time Own ship plot, target plot menuRecording other ship’s track SmoothingOther target plot interval and storage time Erase menu Erasing trackMarks, Lines Entering markSelecting method of entry Selecting mark Entering independent lines Entering lineErasing Marks, Lines Erasing individual marks/linesErasing marks/lines on a area Erasing all marks Entering waypoints WaypointsEntering waypoints by the cursor Enter wpt, nav line menuEntering waypoints at own ship’s position Waypoint listWpt list menu WPT List Enter WPT, NAV LineDisplaying a waypoint Internal storage waypointWay point menu on selecting video plotter Way point menu on selecting navigation External waypointEntering navigation line Navigation LinesEntering new navigation line Enter nav line menuNavigation line list Adding waypoit to navigation linesRemoving waypoints from navigation lines Deleting navigation lines Deleting individual navigation linesDeleting all navigation lines Nav line menu Video plotter mode Setting up the navigation linesPress the Enter key Press the NAV Menu key to close the menu Displaying navigation lines Recording and Replaying DataFormatting memory RAM card Internal navigation linesRecord card menu Recording dataReplay card menu Replaying dataMaintenance for Technicians Initial SettingsVideo plotter initial setting menu Do not open the equipment Replacement of Battery on RP BoardAP-1 Menu TreeAP-2 AP-3 Latitude Error Table on 96 NM RangeSP-1 Specifications