JVC SR-MV50U manual Placing a Disc, Care And Handling Of Discs

Page 11

DISC INFORMATION EN 11

Placing A Disc

Opening the disc tray

Press x (EJECT) to open the disc tray.

x

●Pressing the button again closes the disc tray.

●Use the button to open and close the disc tray.

●Do not block the disc tray with your hand while it is opening or closing as this may result in hardware failure.

●Do not place unplayable discs or any object other than a disc on the disc tray.

●Do not press down strongly on the disc tray or place any heavy objects on it.

Discs without cartridges

Place the disc on the disc tray with the label side facing up. Since disc size changes depending on the disc to be played back, be sure to correctly align the disc with the grooves for its size. If the disc is not in its groove, it may be scratched or otherwise damaged. To insert an 8 cm disc, place it according to the inner groove.

DVD-RAM discs contained in cartridges

Double-sided discs:

Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the side you wish to play back or record facing down. If you insert the disc with “Side A” facing down, programs are recorded on the side A.

Single-sided discs:

Remove the disc from the cartridge. Align the disc with the grooves on the disc tray as shown in the illustration and insert with the label side facing up.

Care And Handling Of Discs

How to handle discs When handling a disc, do not touch the surface of the disc.

Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be

picked up correctly, and such a

disc may cause the unit to malfunction.

Label side

Do not damage the label side, stick paper to or use any adhesives on its surface.

Recording side

Make sure that discs are not scratched and dirty on the recording side before use. Scratches and dirt on the recording side of a disc may hinder proper playback and recording. Also be careful that a DVD-RAM disc may get scratched or dirt when removed from cartridge then put back in after use.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the centre outwards.

If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION:

Sometimes during playback, noise may appear or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No Serial No For Customer UseThis unit should be used with AC 120Vd, 60Hz only Dear CustomerGrounding or Polarization Power SourcesPower Cord Protection Power LinesReplacement Parts AccessoriesCleaning Damage Requiring ServiceOn placing the unit Declaration of ConformityDo not place the unit To mobile phone usersDV in connector is available for DVD deck only Engage the DVD deck’s timer mode.  pgEngage the VCR deck’s timer mode.  pg Edit Original Information Edit Play List Information VCR Plus+ Timer Programming Manual Timer ProgrammingChanging VCR Plus+ Setting RS-232C Interface Command TableDVD-RAM Discs About DiscsRecordable/playable Discs Discs For Playback OnlyFile Structure Of Discs Recording Medium And FormatUnplayable Discs Region NumberFile structure of a disc before starting the MP3/JPEG DVD Video MarksAudio CD/Video CD Marks related to videoCare And Handling Of Discs Placing a DiscFront View C D E F G H I J K pg Rear ViewFront Display Panel On-Screen Display VCR deck Tape Position IndicatorOn-Screen Display DVD deck  pg Remote ControlHow To Use Basic Connection How To Set The Video ChannelAuto Clock Set/Auto Tuner Set What to do if Plug & Play setting failedPlug & Play Set Language Press SET UP to complete the settingProcedure shows how to set Menu Language as an example See Language Code List  pgAuto Daylight Saving Time Semiauto Clock SetManual Clock Set To add channels Tuner SetAuto Channel Set Manual Channel SetLetter Box Monitor Set DVD Deck OnlyPan&Scan/Letter Box Pan&ScanBasic Playback Variable Speed Search Playback FeaturesTo mark positions Still Picture/Frame-By-Frame PlaybackSlow Motion Skip SearchAudio Language/Sound Selection Checking The Time InformationAngle Selection Subtitle SelectionRecording/playback Status Display Live Memory PlaybackAudio Channel Selection Playback Control PBC FunctionRecording screen Overview Of Live Memory PlaybackDisplay During Live Memory Playback To Watch a Program Previously Recorded While Recording Available only when pausedInstant Replay Basic Operation On The On-screen Bar Using The On-screen BarHow To Access The On-screen Bar Contents of the on-screen bar during playbackRepeat Playback Time Search Adjusting The Picture QualitySimulated Surround Effect While stopped Setting The Progressive ModeProgram Playback Random PlaybackTo Set Parental Lock For The First Time To Change The SettingsParental Lock To Temporarily Release Parental LockBasic Recording Recording ModeSecond Audio Recording Elapsed Recording Time And Disc Remaining Time IndicationFree Rate Function Cable Box and DBS Receiver Users Timer ProgrammingDaily/Weekly Recording Press PROG/CHECK to access the Program Check screen Manual Timer ProgrammingTo Timer record The Program With The Programmed Disc On-Disc Timer ProgrammingHow Discs Are Overwritten Program’s information on the front display panel When Programs Overlap Each OtherCheck, Cancel And Change Programs TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40 Usable cassettes Full-Size VHS30 ST-30 60 ST-60 T90 120 ST-120 160 ST-160 ST-210 Compact VHSRewinds the picture a little about 7 seconds and resumes Index SearchFor reverse variable speed search During playback or Live Memory Playback, press UnitVHS Progressive Scan Next Function MemoryManual Tracking Soundtrack SelectionVCR recording lamp lights off on the unit Recording FeaturesRecording Resume Function  pg Press 9 to pause recordingPlayback Repeat Recording Active Video CalibrationElapsed Recording Time Indication Tape Remaining TimeDVD deck is automatically selected. When the DVD deck is Press REC Mode to select the desired recording mode. OrRecording mode See Completed Program Overlap appears on the TV screenPress VCR Timer # When the VCR lamp does not light up on the unitTo cancel a program Limitations of registration Library Database DVD NaviAbout registration of information About editing of programsModify Index When you want the pluralPress 8 to cancel pause mode after pressing Navigation Scan For Beginnings Of Programs Edit Original InformationDelete Program Modify Program NameModify Category Protect TitleMove Scenes Edit Play List InformationAdd Scenes To a Play List Create Play ListModify Program Title Play Back Play ListDelete Unwanted Part From Play List Delete Play ListLoad a disc you want to register Register DiscDelete Information Scan For Program From LibraryOn completion of the playback of all the items Locating The Desired Group And TracksFor MP3 Playback For Jpeg PlaybackAuto Finalizing Dubbing An Entire CassetteFor VCR deck For DVD deckCopy or 1 Prog Press rt to select Copy ModeDubbing a Part Of a Cassette Then press Enter to select FullPress and hold DUBB. for more than 2 seconds to start Load a cassette with the record safety tab intactDubbing An Entire Disc Load a disc you want to dubPause playback by pressing the following buttons 4, 5 Locate the point from where you want to start dubbing, thenDubbing a Part Of a Disc You can dub the selected scenes on a tape to the DVD discDV Dubbing DVD Deck Only Performing dubbing without using the DV Dubbing controllerFor VCR deck only If the camcorder has no S-VIDEO output connectorEdit From a Camcorder When using this unit as the recording deck Example Dubbing to an MD Digital Audio DubbingPress the corresponding button to operate the TV 1, TV/VCR Remote Control FunctionsRemote control 1/2/3/4 Code Switching TV Multi-Brand Remote ControlReceiver 1, CH +/-,number keys Slide the TV/CABLE/DBS/DVD switch to CABLE/DBSControl Number keys, then press EnterEN System Connections Mode Set DVD Deck Power Save does not work when This setting is also applied to the VCR deckDuring Power Save mode Function SET, then press Enter Mode Set VCR DeckFor Example Picture Control Auto / Edit / Soft / SharpTo record in VHS Your unit can record in S-VHS Super VHS, S-VHS ET or VHSTo record in S-VHS To record in S-VHS ET on a VHS cassetteGuide Channel Number SettingGuide Channel Number Set Format a DVD-RW Disc Format a Disc DVD Deck OnlyFormat a DVD-RAM Disc Finalize a DVD-R/RW Disc Cancel The Finalization Of a DVD-RW DiscAfter finalizing For DVD-R/RW Video mode discs Finalize a Disc DVD Deck OnlyLast Function Memory Scan Mode SetMode Lock Tray Lock DVD Deck OnlySet Superimpose to OFF.  pg GeneralPlayback VCR Deck Recording VCR Deck Timer Recording DVD DeckPower failure occurred Set date and time correctly.  pg Recording DVD DeckFor component video connection Timer Recording VCR DeckOther Problems For RF/AV/S-VIDEO connectionDuring Live Memory playback, 8 has been pressed.  pg Timer recording has finished during Live Memory playbackRefers to individual chapters included in a title EN GlossaryDimensions WxHxD Power requirementPower consumption TemperatureLanguage Code List Country/Area Code List for Parental Lock EN Appendix Lower Order N Higher Order Q RS-232C Interface Command TablePage Data Collection Commands Special CommandsOperation Commands Command DescriptionMth Ones When time lapse counter is 1 hr 23 min 45 sec4th Byte Date SenseBit4 During Playback of LP Recorded Tape 1byte 2byte 3byte 4byteBit6 Fixed Bit5 FixedStill Picture/Frame-By-Frame Playback Check, Cancel And Change ProgramsAudio Language/Sound Selection Elapsed Recording Time IndicationSR-MV50U

SR-MV50U specifications

The JVC SR-MV50U is a versatile and innovative multimedia machine that has earned its reputation as a reliable option for both amateur and professional users. This unit combines the functionality of a video recording device with the convenience of a digital media player, making it an excellent addition to any home theater system or production setup.

One of the standout features of the SR-MV50U is its dual-format recording capability. It supports both S-VHS and VHS formats, providing users with flexibility in terms of video quality and playback options. The S-VHS format, known for delivering superior image quality, is particularly advantageous for those looking to capture high-definition content. This dual functionality ensures that users can easily transition between formats as needed.

The SR-MV50U also comes equipped with a built-in MPEG-2 encoder, which enhances the unit’s digital recording capabilities. This technology allows for improved compression and better quality video playback when transferring to digital media. Users can record their favorite shows or home videos onto VHS tapes, while simultaneously creating digital copies for archiving or editing purposes. This makes it particularly useful for video enthusiasts and content creators.

In terms of connectivity, the SR-MV50U is well-equipped, featuring a range of input and output options, including composite video, S-Video, and audio outputs. This extensive connectivity allows users to easily connect the device to televisions, external speakers, or video editing setups, ensuring a seamless workflow in both capture and playback situations.

The user interface of the SR-MV50U is designed to be intuitive, with accessible controls for navigating menus and settings. This makes the device suitable for users of varying experience levels, from beginners to seasoned videographers. Additionally, the remote control feature ensures that users can operate the machine from a distance, enhancing convenience, especially during recording sessions.

Moreover, the JVC SR-MV50U offers time-lapse recording capabilities, providing users with the option to capture long periods of activity in a shorter timeframe. This feature is particularly useful for timelapse projects, surveillance, or documenting events where extended recording is essential.

In summary, the JVC SR-MV50U is a multifunctional device that excels in both video recording and playback. With dual-format recording, built-in MPEG-2 encoding, versatile connectivity options, and user-friendly interface, it stands as a valuable tool for anyone looking to create and enjoy high-quality video content. Its blend of features makes it not only practical but also a durable and efficient choice for various video applications.
Top Page Image Contents