JVC SR-MV50U manual Timer Programming, Daily/Weekly Recording, Cable Box and DBS Receiver Users

Press VCR PLUS+ to access the VCR Plus+ screen.

38 EN OPERATIONS ON DVD DECK

	VCR Plus+	®	Timer Programming	6 Press w e to select the desired recording option as required.
				Press rt to select the desired setting, then press ENTER.
				● “STOP” (To advance/go back the stop time by 30 minutes, press and
				hold rt).
				● “DAILY/WEEKLY” ( pg. 38, “Daily/Weekly Recording”)
				● “REC MODE” ( pg. 36, “Recording Mode”)
				● “NAME” ( pg. 53, “Modify Program Name”)
You can program this unit to timer record as many as 8 programs.
				7 Press ENTER to access the Program Confirmation screen.
With the VCR Plus+ system, timer programming is greatly
				8 Press ENTER to complete timer programming.
simplified because each TV program has a corresponding code
number which your unit is able to recognize.				● To program another timer, repeat steps 3 – 8.
You can use the remote control to enter the PlusCode number.				● If “PROGRAM OVERLAPPED” appears on the TV screen, see
				page 42.

●Make sure that the unit’s built-in clock is set properly.

●Turn on the unit.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/CABLE/DBS/DVD switch to DVD.

9 Press DVD TIMER (#) to engage the unit’s timer mode. The DVD timer indicator lights up on the front display panel and the VCR deck is automatically selected. When the VCR deck is in timer standby mode, the unit is automatically turned off.

DVD TIMER (#)
VCR/DVD	1	2	3
				0 – 9
	4	5	6
	7	8	9
CANCEL		0
VCR PLUS+

ENTER

RETURN

CLEAR (8)

1 Load a recordable disc.

2 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

3

4 Press the number keys to enter the PlusCode number of a program you wish to record, then press ENTER.

● If you have made a mistake, press CANCEL and input the correct number before you press ENTER.

● To clear all entered numbers at a time, press CLEAR(8).

●If the number you entered is invalid, “PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV screen. Input a valid PlusCode number.

●If “GUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU WANT TO RECORD” appears on the TV screen, set Guide Channel Numbers manually. ( pg. 74)

●When “PROGRAM FULL DELETE UNWANTED TIMER PROGRAM” appears on the TV screen, you need to cancel some of the reserved programs. ( pg. 42)

5 The PlusCode number you entered and the matching timer recording information are displayed on the TV screen. Check the program data.

●To cancel this setting, press VCR PLUS+ or RETURN.

IMPORTANT:

Make sure the channel position number you wish to record is displayed; if not, see “Changing VCR Plus+® Setting” ( pg. 74) and set the Guide Channel number correctly.

●To disengage the timer mode, press DVD TIMER (#) again.

NOTES:

●There may be cases that VCR Plus+ Timer Programming function prolongs the stop time of the programming.

●When two successive programs are recorded on a DVD-RW disc with VCR Plus+ Timer Programming function, the beginning of the second one may be left off the recording.

●VCR Plus+ Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.

●If the copy limited program is received during timer recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.

IMPORTANT:

If you have moved to a different area or if a broadcasting station's channel number has been changed, the wrong channel number will be displayed on the VCR Plus+ program screen in step 5. When this happens, set the correct Guide Channel number for that station.

( pg. 74, “Changing VCR Plus+® Setting”)

Cable Box and DBS Receiver Users

To timer record a satellite broadcast using the VCR Plus+ system:

APerform “VCR Plus+® Timer Programming” ( pg. 38).

BSet the cable box or DBS receiver to the appropriate channel before the selected program begins.

C Leave the cable box or DBS receiver’s power on.

Daily/Weekly Recording

You can record programs with one of the following weekly/daily timer settings.

WEEKLY: Select to record a weekly program.

MON–FRI: Select to record a daily program from Monday through Friday.

MON–SAT: Select to record a daily program from Monday through Saturday.

SUN–SAT: Select to record a daily program from Sunday through Saturday.