JVC SR-MV50U manual When the VCR lamp does not light up on the unit, To cancel a program

50 EN OPERATIONS ON VCR DECK

When Programs Overlap Each Other

VCR TIMER (#)
VCR/DVD	1	2	3	1
	4	5	6
CANCEL	7	8	9
		0
PROG/CHECK
ENTER				rtw e

Check, cancel and change programs

1 When the VCR timer indicator lights on the front display panel

Press VCR TIMER (#), then press 1.

When the VCR lamp does not light up on the unit

Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit.

If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

		PR START		STOP	CH	DATE
PROGRAM NOT COMPLETED	1		8:00P	10:00	12	12/24
	2		10:00A	10:45	40	12/25
PROGRAM OVERLAP	3		11:30P	1:00	125	12/25
		4	9:00P	10:00	10	12/24
		5
	6
	7
	8
	(		)](ENTER) (PROG) : END

Example: Program 1 (you have just made) and Program 4 overlap each other.

1 Confirm the overlapping programs. Overlapping programs blink on the TV screen.

2 Press rt to select the program to modify, then press ENTER or e.

●You can only select one of the overlapping programs.

NOTE:

If you do not mind this overlap, press PROG/CHECK to finish the timer program setting. The program with the lower program number will be recorded and the other one will not be recorded correctly. If no changes are made for approximately 1 minute, the unit will return to the normal screen.

2 Press PROG/CHECK to access the Program Check screen.

To cancel a program

Press CANCEL to cancel a program.

PR START		STOP	CH	DATE
1	8:00P	10:00	12	12/24
2	10:00A	10:45	40	12/25
3	11:30P	1:00	125	12/25

4

5

6

7

8

(PROG/CHECK) TO NEXT

3 Press rt to select the desired program to be cancelled or changed.

To cancel the program

Press CANCEL.

●“PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen resumes.

To change the program setting

3 Press rt to select the program,		PROGRAM 4
then press ENTER. The program		START		STOP
screen appears.
		8:00AM		10:00AM
4 Change the settings of the desired		DATE		CH	SP/EP
		12/24/04	12			SP
recording options as required.		FRI
● Refer to steps 7 – 10 in “Manual Timer	PRESS (CANCEL) TO CANCEL
Programming” ( pg. 49).	PRESS (ENTER) TO CONFIRM
	(PROG/CHECK) TO END

5 Press PROG/CHECK to complete

timer correction. The previous screen resumes.

6Press VCR TIMER (#).

●The VCR timer indicator lights up on the front display panel and the DVD deck is automatically selected. When the DVD deck is in timer standby mode, the unit is automatically turned off.

Press ENTER, then go to step 4. 4 Change the program setting.

●Refer to steps 7 – 10 in “Manual Timer Programming” ( pg. 49).

5 Press PROG/CHECK to check if the conflict has been settled. Program check screen appears.

●“PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen resumes.

6Press VCR TIMER (#).

NOTE:

When any overlaps remain after deletion and modification of programs, Program Check screen remains showing the conflicting programs. In such a case, repeat the procedure above until the conflict is solved.