JVC SR-MV50U manual Setting The Progressive Mode, Program Playback, Random Playback, While stopped

34 EN OPERATIONS ON DVD DECK

a

1	2	3	0 – 9
4	5	6
7	8	9

CANCEL	0
	ON SCREEN
ENTER	rtw e

26

4

CLEAR (8)

Setting The Progressive Mode

You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).

1 Set the unit to the progressive scan mode. Refer to “Scan Mode Set” ( pg. 77).

2 Press ON SCREEN twice to access the on-screen bar.

3Press w e to select “ ”, then press ENTER. The pop-up window appears under the selected item.

4Press rt to select the desired option, then press ENTER.

AUTO 1: Used to play a disc containing both video and film source materials. This system recognizes the source type (video or film) of the current disc according to the disc information. Normally select this option.

AUTO 2: Almost the same as the “AUTO 1”, but the processing of the scenes with movement is different. Select “AUTO 1” or “AUTO 2” to your preference.

FILM: Suitable for playing back a progressive scanned film source disc.

VIDEO: Suitable for playing back a video source disc. The outlines on the played back pictures will be soft.

To clear the on-screen bar

Press ON SCREEN.

Program Playback

You can program up to 30 tracks to play back in the desired order.

While stopped

1 Press ON SCREEN twice to access the on-screen bar.

2 Press w e to select “PRGM”, then press ENTER. The program table appears under on-screen bar.

3 Press the number keys to enter the track numbers in the desired order.

Examples:

ATo select track 5, press the

number key “5” and ENTER. B To select track 15, press the number key “1” and “5”.

CTo select track 25, press the number key “2” and “5”.

If you have specified a wrong selection

Press CANCEL. The last selection is erased.

Or press CLEAR (8). The whole selection is erased. 4 Press 4. Playback starts in the programmed order.

●When all of the programmed tracks have been played back, Program Playback stops, but the programmed information remains.

●To add tracks to the end of the program, perform steps 1 through 3.

●During Program Playback, pressing 6 skips to the next selection of the program. Pressing 2 returns to the beginning of the current selection.

To clear the on-screen bar and the contents of the program Press ON SCREEN.

To cancel Program Playback

Press w e to select “PRGM”, then press ENTER.

NOTE:

Program Playback is not possible depending on the type of disc.

Random Playback

You can play back all the tracks on the disc in random order.

While stopped

1 Press ON SCREEN twice to access the on-screen bar.

2Press w e to select “RND”, then press ENTER. Playback starts in random order.

To clear the on-screen bar

Press ON SCREEN.

To cancel Random Playback

Perform steps 1 and 2.

NOTE:

The same track will not be played back more than once during Random Playback.

Select The Switching Interval Of The Slide Show

You can control the switching interval of the slide show.

1 Press ON SCREEN twice to access the on-screen bar.

2Press w e to select “ ”, then press ENTER. The pop-up window appears under the selected item.

3Press rt to select the desired option, then press ENTER.

● Each time you press rt, the interval changes as follows:

5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. { 30 SEC. { (Back to the beginning)

To clear the on-screen bar

Press ON SCREEN.