JVC SR-MV50U On-Disc Timer Programming, To Timer record The Program With The Programmed Disc

40 EN OPERATIONS ON DVD DECK

		On-Disc Timer Programming								7 Press w e to select “STOP”, then press rt to set the desired
										stop time.
										● Each press of rt increases/decreases the stop time in 1-minute
										interval.
										● To increase/decrease the stop time in 30-minutes interval, press and
										hold rt.
										8 Press w e to select “CH”, then press rt to select the desired
On-Disc Timer Programming is a function used with discs that are
especially intended for a specific program. The disc is then										channel.
										● If you are using a DBS receiver, see “ATTENTION FOR DBS
programmed for a program you always watch every day or every
										RECEIVER USERS” ( pg. 39).
week. Since older programs are automatically overwritten, a single
										9 Set “DAILY/WEEKLY” option.
DVD-RAM/RW (VR mode) disc can be used without worrying
about how much recording capacity remains. ( pg. 41)										● Refer to step 6 in “VCR Plus+® Timer Programming” ( pg. 38).
You can program each disc to timer record as many as 8										● It is necessary to set “DAILY/WEEKLY” option for On-Disc Timer
programs.										Programming. ( pg. 38, “Daily/Weekly Recording”)
										10 Set the other recording options as required.
	● Make sure that the unit’s built-in clock is set properly.									● You can select XP, SP, LP, EP or FR480 mode for “REC MODE”.
	● Turn on the unit.									However, you cannot select FR (JUST), FR60–FR360 and FR420.
	● Turn on the TV and select the video channel (or AV mode).									● Refer to step 6 in “VCR Plus+® Timer Programming” ( pg. 38).
	● Slide the TV/CABLE/DBS/DVD switch to DVD.									● It is not possible to use the Free Rate function. ( pg. 37)
										11 Press ENTER to access the Program Confirmation screen.
	ATTENTION:									12 Press ENTER to complete timer programming.
	● On-Disc Timer Programming is possible only with the disc for On-									● To program another timer, repeat steps 3 – 12.
			Disc Timer Programming.
	● If data is recorded on a disc for On-Disc Timer Programming using									Cable Box and DBS Receiver Users
			a unit from another manufacturer, On-Disc Timer Programming							To timer record a satellite broadcast using the On-Disc Timer
			may no longer function properly.							Programming function:
										A Perform “On-Disc Timer Programming” ( pg. 40).
										B Set the cable box or DBS receiver to the appropriate channel
				DVD TIMER (#)						before the selected program begins.
										C Leave the cable box or DBS receiver’s power on.
					VCR/DVD	1	2	3	1

4 5 6

7 8 9

0

PROG/CHECK

ENTER rtw e

To Make The Disc For On-Disc Timer Programming

1 Load a recordable disc.

2 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

3 Press PROG/CHECK to access the Program Check screen.

4 When On-Disc Timer Programming is made for the first time on the disc

Press rt to select “DISC TIMER PRGM”, then press ENTER.

●When some programs are recorded on the disc, a caution message appears. In such a case, backup the programs as required, then format the disc before making On-Disc Timer Programming.

( pg. 75)

When On-Disc Timer Programming has already been made on the disc

Press rt to select “NEW TIMER PROGRAM”, then press

ENTER.

5 Press rt to set the desired date.

●The current date appears on the TV screen. The date you enter appears in its place.

To Timer record The Program With The Programmed Disc

1 Load a programmed disc.

2 Press DVD TIMER (#). The unit turns off and “ ” appears on the front display panel. The DVD timer indicator also lights up on the front display panel and the VCR deck is automatically selected. When the VCR deck is in timer standby mode, the unit is automatically turned off.

●To disengage the timer mode, press 1 again.

NOTES:

●Even if On-Disc Timer Programming is overlapping with other timer programming, any caution message does not appear. In such a case, recording will be executed in the descending order of the recording start time of the program.

●On-Disc Timer Programming is not possible on a DVD-RW disc formatted in video mode. ( pg. 75)

●The information of a program recorded with On-Disc Timer Programming is not stored in the library. ( pg. 56)

●The play list is not created for the programs recorded with On-Disc Timer Programming. ( pg. 54)

●VCR Plus+ Timer Programming is not possible on the discs used exclusively for On-Disc Timer Programming.

●Manual Timer Programming is not possible on the On-Disc Timer Programmed disc. ( pg. 39)

●Basic Recording is not possible on the On-Disc Timer Programmed disc. ( pg. 36)

●The On-Disc Timer Programming function does not work on the unit form other manufactures even if the On-Disc Timer Programmed disc is loaded.

●The beginning of a program may not be recorded. Also, if the 1st program’s recording stop time and the 2nd program’s recording start time is the same, the ending of the 1st program may not be recorded.

●If there is a power cut while recording, the recordings before the power cut are not guaranteed.

6 Press w e to select “START”, then press rt to set the desired start time.

●Each press of rt increases/decreases the start time in 1-minute interval.

●To increase/decrease the start time in 30-minutes interval, press and hold rt.