JVC SR-MV50U manual Dubbing An Entire Disc, Load a disc you want to dub

60 EN EDITING

	Disc Dubbing (From DVD To VCR)			1 For DVD deck
				Load a disc you want to dub.
				For VCR deck
Dubbing An Entire Disc
				Load a cassette with the record safety tab intact.
				2 Press VCR/DVD repeatedly so that the VCR lamp lights up on
Because this unit includes both DVD deck and VCR deck, you can
easily use this unit for dubbing without connecting any other				the unit.
				3 Press REC MODE repeatedly to set the recording mode.
equipment.
				4 Press VCR}DVD to select the dubbing direction.
● Turn on the unit.
				5 Press and hold DUBB. for more than 2 seconds to start the
● Turn on the TV and select the video channel (or AV mode).
● Slide the TV/CABLE/DBS/DVD switch to DVD.				dubbing. The dubbing (DUBB.) lamp lights up on the unit.
				● If the tape has not been rewound, the VCR deck rewinds the tape
		VCR/DVD	VCR } DVD	automatically. When the VCR deck has finished rewinding, dubbing
				begins automatically.
				● After dubbing is completed, the VCR deck rewinds the tape
				automatically.
				● To stop dubbing, press 8.

DUBB. Lamp 8 DUBB.

VCR/DVD

1 2 3

4 5 6

7 8 9

0

NOTES:

●It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points.

●There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts.

●The superimposed indication during the operation or dubbing is not recorded.

●When the end of the tape is reached during dubbing, the tape is ejected and both deck stops.

●It may be impossible to dub a DVD-R or DVD-RW (Video mode) disc recorded on the devices from other manufacturers or on a PC. In such case, perform “Manual Dubbing (From DVD To VCR)”

( pg. 61).

●It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.

8

REC MODE