JVC SR-MV50U manual Setting, Guide Channel Number Set

74 EN SUBSIDIARY SETTINGS

	Changing VCR Plus+			®	Setting	Guide Channel Number Set
				1 Press VCR/DVD repeatedly so that the DVD lamp lights up on
The VCR Plus+ programming system assigns a VCR Plus+ guide
							the unit.
channel to the TV channels and the cable channels. These guide
						2 Press SET UP to access the Main Menu screen.
channel numbers are also called the VCR Plus+ channel codes.
						3 Press w e to select “INITIAL SET UP”, then press ENTER.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station.						4 Press w e to select “TUNER
To ensure that VCR Plus+ timer recording operates correctly, it is							SET”, then press ENTER.
necessary to set the VCR Plus+ “Guide Channel Set” for each						5 Press rt to select “GUIDE
station.
						CHANNEL SET”, then press
If you have moved to a different area or if a broadcasting station’s
						ENTER.
channel number has been changed, perform the following steps to
set the correct guide channel number.
NOTES:						6 Press rt to select “GUIDE CH”,
● In many instances, the VCR Plus+ guide channel numbers for cable
	and broadcast TV stations DO NOT match the channel number on						then press ENTER.
	which it is received by your unit or cable box. Check your TV listing,					7 Press rt to select the Guide
	or contact your cable supplier for details.
						Channel number for the desired
● Many TV stations can be viewed on cable. Check your TV listing, or
						station as shown in the TV listings.
	contact your cable supplier for details.
						Then press ENTER.
● Turn on the unit.						● To change the Guide Channel
							number in 10 increments, press and
● Turn on the TV and select the video channel (or AV mode).
							hold rt.
● Slide the TV/CABLE/DBS/DVD switch to DVD.
						● If you receive your channels with a cable box and if you have
							properly set your Controller, “CATV CH” appears in place of “DVD
							CH”.
		VCR/DVD				8 Press rt to select “DVD CH”, then press ENTER. Press rt
						to select the number of the unit’s channel position on which the
1			2	3		Guide Channel number’s broadcast is received by the unit or the
4			5	6
						DBS receiver. Then press ENTER.
7			8	9

0

ENTER	rtw e
SET UP

●Repeat steps 6 and 8 as necessary.

9 Press SET UP to complete the setting.

Guide Channel Number

“Guide Channel (GUIDE CH) number” refers to the assigned TV station numbers, according to broadcast area, for the VCR Plus+ timer recording. The Guide Channel numbers can be found in most TV listings.