JVC SR-MV50U Tuner Set, Auto Channel Set, Manual Channel Set, To add channels, To skip channels

INITIAL SETTINGS EN 21

Tuner Set

●Turn on the unit.

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/CABLE/DBS/DVD switch to DVD.

VCR/DVD

1	2	3
4	5	6
7	8	9
	0

ENTER	rtw e
SET UP

INFORMATION

The unit selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.

Auto Channel Set

Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting.

1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

2 Press SET UP to access the Main Menu screen.

3 Press w e to select “INITIAL SET UP”, then press ENTER.

4 Press w e to select “TUNER SET”, then press ENTER.

5 Press rt to select “AUTO CH SET”, then press ENTER. You can automatically set the receivable channels in your area in the order of their frequencies.

● When Auto Channel Set is complete, “SCAN COMPLETED” appears on the TV screen.

●If the scan was unsuccessful,

“SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the connections and start again.

6 Press SET UP to complete the setting.

Manual Channel Set

You can add the channels you want or delete the channels you do not want manually.

1 Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit.

2 Press SET UP to access the Main Menu screen.

3 Press w e to select “INITIAL SET UP”, then press ENTER.

4 Press w e to select “TUNER

SET”, then press ENTER.

5 Press rt to select “MANUAL CH SET”, then press ENTER.

6 Add or skip the desired channels.

To add channels

APress rt to select “CH”, then press ENTER.

B Press rt to select a channel

number you want to add, then press

ENTER.

CPress rt to select “ADD/SKIP”, then press ENTER. D Press rt to select “ADD”, then press ENTER.

E Repeat B – D to add other channels.

To skip channels

APress rt to select “CH”, then press ENTER.

BPress rt to select a channel number you want to skip, then press ENTER.

C Press rt to select “ADD/SKIP”, then press ENTER. D Press rt to select “SKIP”, then press ENTER.

E Repeat B – D to skip other channels.

7 Press SET UP to complete the setting.