JVC DR-M70SEK manual Guide to On Screen Displays, Display menu, Setting menus, Easy Setting Menu

Before you start

Guide to On Screen Displays

DISPLAY menu

With a disc inserted into the unit, press

[ON SCREEN] to display the on screen display. The menu shows information about what is recorded on the disc.

3				1
	1 1	0:00:00		DVD-RW
4				Video mode
				P22
				Main
				2
6			SP	1:35
				5

This is an example screen for explanation. Displayed items vary depending on the actual mode.

1 Disc type and format mode.

In some descriptions in this manual, only one type of disc is indicated as an example.

2Position number and audio status of the programme.

3Title number, chapter number and the time lapse of disc playback.

4Each icon means:

: Search

: Audio

: Subtitle

: Angle (except VR mode)

: Repeat

: Marker

: Noise Reduction

: Zoom

5Recording mode and remaining time.

6Status of the current disc.

Setting menus

Press [SET UP] in stop mode to display “Easy Setting Menu” or “Advanced Setting Menu”. Choose either “Easy Setting Menu” or “Advanced Setting Menu” using [Cursor U / D], then press [ENTER] to change between the menus.

“Easy Setting Menu” and “Advanced Setting Menu” are available from the Setting Menu. The “Easy Setting Menu” consists of the settings frequently needed, while the “Advanced Setting Menu” consists of all the settings available. You can set the items marked with in the “Easy Setting Menu.”

The unit remembers which setting menu you used last time and recalls it when you press [SET UP] in stop mode next time, even if power is switched off. (i.e., if you use the “Easy Setting Menu” and then turn the unit off, the “Easy Setting Menu” will appear next time you turn on the unit and press [SET UP] in stop mode.)

Easy Setting Menu:

You can make the settings of the basic items as follows.

Easy Setting Menu

Clock
Channel
DVD-RW Recording Format	Video mode
Timer Programming
Auto Finalise
Disc
Advanced Setting Menu

1 Clock:

Set the unit clock.

2 Channel:

Set up auto tuning or manual tuning.

3 DVD-RW Recording Format:

Select the DVD-RW recording format between Video mode and VR mode.

4Timer Programming:

Programme a timer recording.

5Auto Finalise:

Set Auto Finalise to “ON” or “OFF”.

6 Disc / CD Playback Mode:

“Disc” is available only when a DVD-RW / R disc is inserted into the unit. If a DVD-Video (commercially available), a new DVD-R disc or a finalised DVD-R disc is inserted into the unit, you cannot select “Disc.” “CD Playback Mode” is available only when an Audio CD, Video CD or a CD-RW / R disc containing MP3 / JPEG files is inserted into the unit.

12 EN