JVC DR-M70SEK manual Timer recording using the Video Plus+ system, Code Error is displayed if

Page 28
• If your local channel information is programmed in the unit’s memory, your local channel number appears automatically.
• If your local channel information is not programmed in the unit’s memory, “P– –” may appear.
• If you select the channel number using [Cursor U / D], it is stored in the unit’s memory.
5 Select a recording speed using [Cursor U / D], then press [Cursor P].
6 Press [SET UP] or
[the VIDEO Plus+ button] to exit.
7 Press [STANDBY/ON y/I].
The icon will appear on the front panel display and the unit enters to the timer-standby mode.
Date
1. Daily
2. - - -
3. - - -
4. - - -
5. - - -
6. - - -
7. - - -
8. - - -

Recording

Timer recording using the VIDEO Plus+® system

You can programme the timer using the PlusCode numbers that are printed in your local TV guide magazine.

1 In stop mode, press [the VIDEO Plus+ button].

•If the Timer Programming list is full, the Timer Programming mode is activated instead of the VIDEO Plus+ programming mode.

•Press [the VIDEO Plus+ button] again in the VIDEO Plus+ programming mode to switch to the Timer Programming mode.

2 Set the PlusCode number of the programme you want to record using [the Number buttons], then press [ENTER].

VIDEO Plus+ System

Please enter a PlusCode No.

- - - - - - - - -

4 Select a recording channel using [Cursor U / D], then press [Cursor P].

Timer Programming

Start

End

CH

Speed

7:30

14:15

P08

LP

 

 

 

 

3 Select the desired recording pattern

using [Cursor U / D], then press [ENTER].

VIDEO Plus+ System

Once

Daily

M-F

Weekly

Once: To record a TV programme once, as you set.

Daily: To record a TV programme at the same time on the same channel everyday.

M-F:To record a TV programme at the same time on the same channel from Monday through Friday.

Weekly: To record a TV programme at the same time on the same channel every week.

Note

•If you have not set the clock, the clock setting window will appear after step 1. Continue from step 5 in “Clock Setting” before programming the timer. (See page 19.)

•If the PlusCode number is not available, “Code Error” is displayed and the number will clear when you press [ENTER] in step 2.

•If the PlusCode number previously set overlaps with the one you entered and the channel is different, “Overlap” is displayed but the timer programming will be cleared when you press [ENTER] in step 3.

•If you enter the same PlusCode number and the recording pattern which you have already entered, the previously set programme will be overwritten.

•If you enter the same PlusCode number but a different recording pattern, it will be saved as a new programme and added to the timer programming list.

“Code Error” is displayed if:

•A past time is entered for start and end times.

•The PlusCode number cannot be decoded.

“Overlap” is displayed if:

•There is an overlap with a timer recording setting in different channels.

28 EN

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Video Plus+ and PlusCode are registered Trademarks of Gemstar DevelopmentCorporation. The Video Plus+ system is Manufactured under license fromPrecautions Laser SafetyPower Supply Accessories SuppliedInstallation Location Avoid the Hazards of Electrical Shock and FireMoisture Condensation Warning About CopyrightMaintenance Connection to PowerMains Cord Table of contents Features RecordingPlayback EditingSymbol Description Functional overview Front panelRear panel Remote control Installing batteries in the remote control About the remote controlSetting menus Easy Setting MenuGuide to On Screen Displays Display menuAdvanced Setting Menu Front Panel Display Guide Display messagesConnecting to a TV Connecting to external equipmentUsing the S-VIDEO OUT jack and the Analog Audio OUT jack ConnectionsConnecting to an MD deck or DAT deck Digital audio for better sound qualityAfter you have completed connections Connections illustrated above are optional for better soundChannel setting Auto tuningManual tuning Press SET UP to exitTo skip a Preset channel After completion, press SET UP to exitTo select a channel MoveSetting the clock Clock SettingSelecting the TV aspect ratio HintInformation on DVD recording Type of discsRecording speed Restrictions on recordingFeatures Information on copy controlMaking discs playable in other DVD players Finalise Usable discsFormatting a disc Setting Auto ChapterChoosing the recording format of a blank DVD-RW disc Selecting the Sound mode Setting External input audioInsert a recordable disc Stop mode, press SET UP Reformatting a disc manuallySetting Bilingual Recording Audio Basic recordingTurn on the unit and insert a recordable disc Press Stop S to stop the recordingOne-touch timer recording OTR Checking the recording picture and sound qualityPress REC Monitor again to exit REC Speed repeatedlyTimer recording Enter the date using Cursor U / D, then press Cursor PPress Enter when all information required is entered Press STANDBY/ON y/IIf the timer programming did not complete correctly Error number appears on the timer programming listError numbers indicate Press Clear to erase the selected programmeTimer recording using the Video Plus+ system Code Error is displayed ifStop mode, press the Video Plus+ button Overlap is displayed ifHints for timer recording Priority of overlapped settingsIf the starting time is same If the recording time is partially overlappedConnection to external equipment Settings for external equipmentRecording from external equipment Finalising discs Finalising will startAuto finalise To cancel finalising DVD-RW onlyFinalising is complete Information on playing back DVDs Playable discsColour systems Region codesBasic playback Hint for DVD playbackPlaying back a DVD-RW / DVD-R DVD+RW / DVD+R disc Playing back a DVD-Video / CD / Video CDPlaying back discs using the disc menu Select an item using Cursor U / D / L / P, then press EnterPress MENU/LIST Press MENU/LIST to exit the disc menuPlaying back a Video CD using the title menu Playing back a disc using the title menuPBC function for Video CDs Cancelling and Recalling the PBC function Special playbackResume playback Fast forward / Fast reverseSkipping TV commercials during playback PauseStep by step playback Slow forward / Slow reverse playbackZoom Marker SetupDuring playback, press Zoom Search Title / Chapter searchTrack search Direct SearchTime search Repeat / Random / Program playback / Slide ShowRepeat playback Select Random Play using Cursor U / D, then press Enter Random playbackProgram playback Slide ShowSwitching audio soundtrack Switching subtitlesSelecting the format of audio and video Press Audio during playback, and follow from stepSwitching camera angles Select the icon using Cursor L / P, then press EnterAngle will switch each time you press Enter Reducing block noiseEditing discs in Video mode Disc editingGuide to a title list Deleting titlesEditing titles Guide to editing title namesFollow steps 1 to 4 in Deleting titles Window for entering the title name will appearSetting or clearing chapter markers Press SET UPEditing discs in VR mode Original Editing Original titles in VR modeOriginal Deleting titles Editing original titles OriginalTo protect a whole disc DVD-RW VR mode only Original Protecting titlesOriginal Releasing titles from protecting Follow steps 1 to 4 Original Protecting titles Press EnterPlaylist Deleting titles Playlist Editing the Playlist in VR modePlaylist Deleting parts of titles Scene Delete Playlist Setting or clearing chapter markers Playlist Editing titlesAdding a chapter marker Deleting a chapter markerPlaylist Setting pictures as thumbnails Playlist Dividing a titlePicture is set as the thumbnail You can divide a title into two new titlesSelect Yes using Cursor L / P, then press Enter Playlist Combining titlesPlaylist Adding titles to a Playlist Playlist Deleting a PlaylistChanging the Setting menu Tour of the Setting menuLanguage setting Disc Menu Language Default EnglishAudio Language Default Original Subtitle Language Default OFFDisplay setting Audio settingFL Dimmer Default Auto Screen Saver Default 10 minutesDynamic Range Control Default on Fast Forward with Audio Default onDolby Digital conversion Default Stream Settings for Mpeg Default PCMParental Lock Default All Enter the current password using the Number buttonsPassword is not yet set Password is already setSetting TV system Changing Video Out systemTroubleshooting Symptom RemedyStop S Error message Cause Solution ALLLanguage code Language CodeGlossary Specifications Declaration of ConformityGeneral Recording66 EN Page DR-M70SEK
Top Page Image Contents