JVC DR-M70SEK manual Hints for timer recording, Priority of overlapped settings

Page 29

Hints for timer recording

•If there is a power failure or the unit is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If there is no disc or an unrecordable disc in the tray, the icon will flash and timer recording will not occur. Insert a recordable disc.

•When all timer recordings are complete, the icon flashes. To play back or eject the recorded disc, press [STANDBY/ON y/I], and then press [PLAY P] or [OPEN/CLOSE O].

•During timer recording or timer-standby mode ( icon appears on the front panel display), no operations on the unit are available. To make operations available, cancel the timer recording or timer-standby mode ( icon disappears).

•To cancel the timer-standby mode, press [STANDBY/ON y/I].

•If the Start and End times are same, the length of the recording will be set for 24 hours. If the disc becomes full during recording, the unit will turn itself off.

•If two or more programmes overlap, “Overlap” and the overlapped programme number will appear on the display.

•If the Start time is earlier and the End time is later than the current time, the recording will start immediately after you turn the power off.

Priority of overlapped settings

The unit records programmes according to priority if timer programmes overlap.

If the starting time is same:

•The timer programming set first (PROG. 1) has priority.

 

 

 

 

 

PROG. 2

PROG. 1

 

 

 

 

 

 

 

 

recording

PROG. 2

 

 

 

 

will start

 

 

 

 

 

 

 

 

after

 

 

 

 

 

 

 

 

 

 

PROG. 1

Actual

 

 

 

 

recording is

recording

PROG. 1

 

PROG. 2

completed.

 

 

 

 

 

 

Additional 30 seconds (at the most) are cut off.

If programming has been made at the end of the programming (PROG. 1) currently being recorded:

•The timer programming set first (PROG. 2) has priority. PROG. 3 will not be recorded.

PROG. 1

 

 

 

 

 

 

 

PROG. 2

 

 

 

 

 

 

 

recording

PROG. 2

 

 

 

 

 

 

 

will start

 

 

 

 

 

 

 

PROG. 3

 

 

 

 

 

 

 

after

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. 1

Actual

 

 

 

 

 

 

 

recording is

recording

PROG. 1

 

PROG. 2

completed.

 

 

 

 

 

 

 

 

 

Additional 30 seconds (at the most) are cut off.

If the recording time is partially overlapped:

•The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is complete.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 2

PROG. 1

recording

Additional 30 seconds (at the most) are cut off.

If the recording time entirely overlaps:

•The shorter timer programming (PROG. 1) is not recorded.

PROG. 1

 

PROG. 2

 

Actual

PROG. 2

recording

 

Note for DVD recording

•If the recording time of two programmes overlap, or the End time of a programme and the Start time of another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being recorded and the Start time of the subsequent programme are same:

•If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 1

PROG. 2

recording

The first 30 seconds

(at the most) are cut off.*

*If the cut off time exceeds 1 minute, the error number “E40” will appear in the timer programming list.

Recording

EN 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Trademarks of Gemstar Development Video Plus+ and PlusCode are registeredCorporation. The Video Plus+ system is Manufactured under license fromLaser Safety PrecautionsPower Supply Accessories SuppliedAvoid the Hazards of Electrical Shock and Fire Installation LocationMoisture Condensation Warning About CopyrightMains Cord Connection to PowerMaintenance Table of contents Recording FeaturesPlayback EditingSymbol Description Front panel Functional overviewRear panel Remote control About the remote control Installing batteries in the remote controlEasy Setting Menu Setting menusGuide to On Screen Displays Display menuAdvanced Setting Menu Display messages Front Panel Display GuideConnecting to external equipment Connecting to a TVUsing the S-VIDEO OUT jack and the Analog Audio OUT jack ConnectionsDigital audio for better sound quality Connecting to an MD deck or DAT deckAfter you have completed connections Connections illustrated above are optional for better soundAuto tuning Channel settingManual tuning Press SET UP to exitAfter completion, press SET UP to exit To skip a Preset channelTo select a channel MoveClock Setting Setting the clockSelecting the TV aspect ratio HintType of discs Information on DVD recordingRecording speed Restrictions on recordingInformation on copy control FeaturesMaking discs playable in other DVD players Finalise Usable discsChoosing the recording format of a blank DVD-RW disc Setting Auto ChapterFormatting a disc Setting External input audio Selecting the Sound modeInsert a recordable disc Stop mode, press SET UP Reformatting a disc manuallyBasic recording Setting Bilingual Recording AudioTurn on the unit and insert a recordable disc Press Stop S to stop the recordingChecking the recording picture and sound quality One-touch timer recording OTRPress REC Monitor again to exit REC Speed repeatedlyEnter the date using Cursor U / D, then press Cursor P Timer recordingPress Enter when all information required is entered Press STANDBY/ON y/IError number appears on the timer programming list If the timer programming did not complete correctlyError numbers indicate Press Clear to erase the selected programmeCode Error is displayed if Timer recording using the Video Plus+ systemStop mode, press the Video Plus+ button Overlap is displayed ifPriority of overlapped settings Hints for timer recordingIf the starting time is same If the recording time is partially overlappedRecording from external equipment Settings for external equipmentConnection to external equipment Finalising will start Finalising discsFinalising is complete To cancel finalising DVD-RW onlyAuto finalise Playable discs Information on playing back DVDsColour systems Region codesHint for DVD playback Basic playbackPlaying back a DVD-RW / DVD-R DVD+RW / DVD+R disc Playing back a DVD-Video / CD / Video CDSelect an item using Cursor U / D / L / P, then press Enter Playing back discs using the disc menuPress MENU/LIST Press MENU/LIST to exit the disc menuPBC function for Video CDs Playing back a disc using the title menuPlaying back a Video CD using the title menu Special playback Cancelling and Recalling the PBC functionResume playback Fast forward / Fast reversePause Skipping TV commercials during playbackStep by step playback Slow forward / Slow reverse playbackDuring playback, press Zoom Marker SetupZoom Title / Chapter search SearchTrack search Direct SearchRepeat playback Repeat / Random / Program playback / Slide ShowTime search Random playback Select Random Play using Cursor U / D, then press EnterProgram playback Slide ShowSwitching subtitles Switching audio soundtrackSelecting the format of audio and video Press Audio during playback, and follow from stepSelect the icon using Cursor L / P, then press Enter Switching camera anglesAngle will switch each time you press Enter Reducing block noiseDisc editing Editing discs in Video modeGuide to a title list Deleting titlesGuide to editing title names Editing titlesFollow steps 1 to 4 in Deleting titles Window for entering the title name will appearPress SET UP Setting or clearing chapter markersOriginal Editing Original titles in VR mode Editing discs in VR modeOriginal Deleting titles Editing original titles OriginalOriginal Protecting titles To protect a whole disc DVD-RW VR mode onlyOriginal Releasing titles from protecting Follow steps 1 to 4 Original Protecting titles Press EnterPlaylist Deleting parts of titles Scene Delete Playlist Editing the Playlist in VR modePlaylist Deleting titles Playlist Editing titles Playlist Setting or clearing chapter markersAdding a chapter marker Deleting a chapter markerPlaylist Dividing a title Playlist Setting pictures as thumbnailsPicture is set as the thumbnail You can divide a title into two new titlesPlaylist Combining titles Select Yes using Cursor L / P, then press EnterPlaylist Adding titles to a Playlist Playlist Deleting a PlaylistTour of the Setting menu Changing the Setting menuDisc Menu Language Default English Language settingAudio Language Default Original Subtitle Language Default OFFAudio setting Display settingFL Dimmer Default Auto Screen Saver Default 10 minutesFast Forward with Audio Default on Dynamic Range Control Default onDolby Digital conversion Default Stream Settings for Mpeg Default PCMEnter the current password using the Number buttons Parental Lock Default AllPassword is not yet set Password is already setChanging Video Out system Setting TV systemSymptom Remedy TroubleshootingStop S ALL Error message Cause SolutionLanguage Code Language codeGlossary Declaration of Conformity SpecificationsGeneral Recording66 EN Page DR-M70SEK
Top Page Image Contents