LG Electronics 37LD330H, 32LD330H Installer Remote Control Typical Key Functions, Vol, Menu

Installer Remote Control Typical Key Functions

The LG Installer Remote illustrated below and throughout this document shows typical remote control functions and is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.

POWER Turns TV ON or OFF.

ALARM Sets the time when the TV will automatically turn itself ON.

TIMER Sets the amount of time before the TV automatically turns itself OFF.

INPUT Selects RGB, HDMI/DVI1, HDMI2, Component Input, AV1, and AV2 sources.

TV Returns to the last TV channel (from an Aux input).

VOLUME UP/DOWN Increases/decreases sound level.

INFO Displays channel information.

PORTAL Displays and removes the interactive menu.

MUTE Switches sound ON or OFF.

CHANNEL/PAGE UP/DOWN Changes the channel. Moves from one full set of screen information to the next.

Color buttons access special functions in some menus.

DVD/VCR BUTTONS Controls some DVD players or video cassette recorders.

EJECT Ejects a USB memory device, CD, DVD, VHS tape, as applicable.

206-4185

ALARM TIMER		INPUT					NUMBER Buttons (0 - 9) & DASH
				TV			Use to enter a program number or channel.
							Dash is used for sub-channel numbers such
1		2		3			as 2-1, 2-2, 9-1, 9-2, 100-3, 100-4, etc.
							FLASHBK (FLASHBACK)
4		5		6			Returns to the previously tuned channel.
							Arrows (Up/Down/Left/Right) & ENTER
7		8		9
							Use to navigate on-screen menus and
							adjust TV settings to your requirements.
		0		FLASHBK			MENU
							Displays the TV setup menus on the screen.
							Also exits the on-screen menu system and
	INFO						returns to TV viewing.
			i				GUIDE
VOL				CH	P		Displays and removes the electronic
	PORTAL				A
					G		program guide.
					E
	MUTE						CC
MENU	GUIDE			CC			Press to activate subtitles.
							RETURN
							Returns one level to the previous menu/
							display.
	ENTER						SAP
							Analog Mode: Selects MTS sound (Mono,
							Stereo, or SAP). DTV Mode: Changes
							audio language, if additional languages are
RETURN		SAP		EXIT			available. *
							EXIT
							Clears all on-screen displays and returns to
							TV viewing.
							RATIO
				EJECT			Adjusts the picture aspect ratio.
RATIO
					*	SAP notes:
						•	If SAP is selected and no SAP is provided, sound
						•	may not be heard on channel.
							Each analog channel may have its own SAP setting.
						•	Digital channels will reset to default audio language
							with a power off/on.

11