LG Electronics 37LD330H, 32LD330H setup guide Teaching FMA Configuration to a TV

FTG Mode of Operation (Cont.)

Teaching FMA Configuration to a TV

This procedure describes how to “Teach” an FMA Configuration file from a USB memory device to a TV. Ensure you have completed the procedure on the previous page to create the FMA Configuration file before proceeding with the steps below.

1.Plug the USB memory device that contains the FMA Configuration file into the Target LD330H TV USB IN port.

2.Press MENU to display the TV setup menus, use the arrow navigation keys to select/highlight either the Option (if TV is in Pass-through Mode) or Lock (if TV is already in FTG Mode) menu icon, and then press the number “7” key a total of seven times to display the USB Download Menu.

3.Use the Up/Down arrow keys to select Teach To TV (FMA), and then press

ENTER.

4.Use the Up/Down arrow keys to select the FMA Configuration file you want to install, and then press ENTER.

The TV will show Teaching completion progress in a new window. Do NOT re- move the USB device until Teaching is complete. When Teaching is complete, the TV will tune to the first logical channel in the FTG Channel Map.

5.When Teaching is done, remove the USB memory device. The FMA Configuration should be resident on the Target TV. Also, the Target TV CPU is now in FTG Mode (if it was previously in Pass-through Mode).

USB Download Menu

Upgrade TV Software

Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (FMA)

Return Enter

Teach To TV (FMA)

xx0BAL-PLAT200001.FMA

Return Enter

!Teach To TV

UPDATING...

50%

Do not unplug!

206-4185 31