LG Electronics Contact Customer Support at 888-865-3026 for LG Flat Panel Television Assistance

Page 2

For Customer Support/Service, please call:­

1-888-865-3026

The latest product information and documentation is available online at:

www.LGsolutions.com/products

MODEL and SERIAL NUMBER

The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here:

Model No._________________ Serial No._______________

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

POWER CORD POLARIZATION:

This product is equipped with a 3-wire grounding-type alternating current power plug. This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, contact your elec- trician to replace your obsolete outlet. Do not defeat the safety purpose of the 3-wire grounding-type plug.

NOTE TO CABLE/TV INSTALLER:

This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

REGULATORY INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Do not attempt to modify this product in any way without written authorization from LG Electronics U.S.A., Inc. Unauthorized modification could void the user’s authority to operate this product.

COMPLIANCE:

The responsible party for this product’s compliance is: LG Electronics U.S.A., Inc.

1000 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA • Phone: 1-201-816-2000

Marketed and Distributed in the United States by LG Electronics U.S.A., Inc.

1000 Sylvan Avenue, Englewood Cliffs, NJ 07632

2

© Copyright 2011, LG Electronics U.S.A., Inc.

206-4185

Image 2
Contents 206-4185 Rev a Copyright 2011, LG Electronics U.S.A., IncFor Customer Support/Service, please call­ Grounding Power CordOverloading Disconnect DeviceAntenna Grounding According to NEC, ANSI/NFPA CleaningOutdoor Antenna Grounding Transporting ProductTable of Contents Commercial Mode Setup Overview Setup Checklist / Commercial Mode Setup OverviewSetup Checklist Information ProCentric TV Interactive Menu FeaturesChannel Guide HelpAUDIO/VIDEO LD330H Rear Jack PanelComponent MPIRF Antenna Connection Side Connections Panel / RF Antenna ConnectionSide Connections Panel 2 InputInstalling Batteries in Installer Remote Installer OverviewInstaller Remote CloningMenu Installer Remote Control Typical Key FunctionsVOL Set up TV features Commercial Mode Setup for Master TVSet Installer Menu items Run Auto Tuning Channel SearchVerify the TV setup Lock the channel lineupUsing the Installer Menu Installer MenuAccessing the Installer Menu Exiting the Installer Menu and Activating UpdatesInstaller Menu Items 000 through Brief Description of Function and CommentsInstaller Menu Items 073 through CH not AvbleMute Disable Detailed Descriptions of Installer Menu ItemsInstaller Sequence Caption Lock Sleep TimerFeature Level Poll RateChksm Error Checksum Error DIS. CH-TIME Disable Channel-TimeEN. CH-T COL. Enable Channel-Time Custom Color Rear RGB EN. Rear RGB EnableBack Lighting Atsc Tune ModeProcentric Atsc BandTV Setup Menus Overview Editing/Adding Channel Icons and/or Labels To perform channel editing/labelingBefore you begin cloning Cloning Overview / Clonable Menu FeaturesClonable Menu Features Teach Master TV Setup to Target TV Cloning ProceduresLearn Setup from Master TV USB Cloning NotesCable TLL-1100A Cloning NotesTLL-1100A Clone Programmer TV Link Optional Set the Clock Different Master TV Setups LT2002 Cloning NotesFrom previous Determining the TV Operating Mode FTG Mode of OperationFTG Mode Overview TV Setup MenusFTG Mode of Operation Teaching FMA Configuration to a TV Learning an FMA Configuration File from a TV Optional Manual Configuration / Setup for a TV EDIT/ADD MAP FTG Configuration Application Utilities OverviewFTG Channel Map Configuration Utility Print MAPDelete UpdateFTG Channel Map Editor ADDHOSPITAL-GRADE TV only FTG Installer Menu Configuration UtilityInstaller Defaults NEW/OPEN/SAVE FMA Configuration UtilityFMA Configuration List Checking the Software Versions Upgrading TV/PTC SoftwareSplash Screen Image File Guidelines Downloading a Splash Screen ImageReference Power Consumption Settings StaticCamport Operation Stand-alone Reference TV Camport Auto Sense OperationCamport Side Video Functionality Control Camport Operation FTG or PPVReference TV Aux Input Configuration EnableReference Resetting a TV to Pass-through Mode Troubleshooting General TroubleshootingTroubleshooting Flow Chart Controller Quick CheckSymptom Possible Causes Solutions Commercial Mode Check / FTG Operation TroubleshootingFTG Operation Troubleshooting Symptom Possible Causes Possible Solutions Clone Programmer TroubleshootingReset Clone Programmer After Static Shock Clone ProgrammerGlossary of Terms Date Description May Revision a New document Document Revision History / NotesDocument Revision History For Customer Support/Service, please call­
Related manuals
Manual 267 pages 53.59 Kb