Getting Connected
TIP
Want to finish setting up some of the functions later? Just press MENU on your remote, press SELECT on Settings then select Setup.
Guided Setup and Activation
Now that your receiver and equipment are all hooked up and plugged in, you’re ready to finish all the details to begin receiving your DIRECTV service.
1)Make sure the MODE SWITCH on the remote control is set to DIRECTV.
2)Press TV POWER ON. The DIRECTV HD Receiver will turn on (after you program the remote for your TV, the TV will also turn on when you press this button while the MODE SWITCH is set to DIRECTV).
3)Turn on your TV.
4)You should see the Display Language screen. This begins Guided Setup which will walk you through the steps necessary to finish setting up your equipment.
HDTV settings in Guided Setup
Several screens in the Guided Setup process are related to HDTV. These are some things to note about them.
4TV Ratio Screen: the Screen Format setting offers the options defined on page 7. This setting can be changed easily while watching TV by using the FORMAT button on the remote (this is explained further on the following page).
4Resolution Screen: the TV Resolution setting should be set to display resolutions that your TV can support. By including in this setting resolutions your TV does not support, it will be possible to lose video and audio when adjusting your receiver to optimize reception quality while watching TV. If your TV supports 1080i, 720p, 480i and 480p resolutions, you can set TV Resolution to All. With this setting, you will be able to turn on Native which lets the receiver automatically adjust resolution to match the resolution of individual TV programs as they are tuned.
4Primary Local Network: If you’ve chosen to set up both your Satellite Dish and
32Guided Setup and Activation